The Model 3001 Well Cap Assembly is designed to fit 2" wells,
and provides options for installing Leveloggers with wireline,
Kevlar rope, or using a Direct Read Cable.
The well cap base provides a tight friction fit onto the well
casing. The cap is secured to the base with a twist lock. For
further security, a 3/8” (9.5mm) shackle diameter lock can be
used. The Well Cap is vented to allow for the equalization of
barometric pressure in the well.
Users can choose to permanently secure the PVC Well Cap to
the well casing, using three screw points on the inner shoulder
of the Well Cap Base. |
To install using a Direct Read Cable, lower the Levelogger with
the Direct Read Cable through one opening in the insert.
Note: The insert has openings to hold two dataloggers in
the same well. |
 |
 |
For wireline or Kevlar rope suspension, simply use the suspension
hook on the underside of the insert to secure the Levelogger to
one Well Cap. |
| If installing Leveloggers in a 4” well,
a reducer assembly is available.
(#110235) |
 |
e.jpg)