GENEQ > Essais sur Matériaux > Duromètres

Duromètre de mesure de la densité de l’enroulement de bobines et autres
 

yarn_package_durometer.jpg (7324 octets)

The HP models accurately measure the winding density of textile bobbins, beams, spools, spindles, cones, quills, dye packages, rolls, etc. Models HPSA and HPSD accurately measure the hardness of rubber and plastics.

FEATURES
  • Constant-pressure indicating system assures uniform test pressure eliminating false readings due to differences between operators.
  • Operation is as easy as pressing the spring-loaded knurled aluminum shell down to the red line.
  • Supplied in a foam-fitted carrying case.

SPECIFICATIONS
 
HP models
HPSA
HPSD
Test pressure
12.5N (2.8 lbs)
12.5N (2.8 lbs)
50N (11 lbs)
Scale Marking
0-100 units
Scale Diameter
56 mm
Dimensions
110 x 58 mm (4.3" x 2.3")
Weight
310g (11 oz.)

CAT. NO. DESCRIPTION
Model Indentor Ball Size Application
HP-2.5 2.5mm Closely wound synthetic, hard finish fibers and filaments
HP-5 5 mm Average yarns, threads, fibers, etc., wound with moderate winding density
HP-5F 5 mm Same the HP-5, except with flat base for large yarn packages over 15" (380 mm) in diameter.
HP-10 10mm Loosely wound spools of natural or synthetic yarns and fibers, bulky yarns.
HP-10F 10mm Same as HP10, except with flat base for large yarn packages over 15" (380mm) in diameter.
HPSA Dull Point For rubber parts. Uses standard Shore "A" calibration units
HPSD Sharp Point For plastic parts. Uses standard Shore "D" calibration units.