e.jpg)
| Zanntech Analytical Evaporators |
| Description |
Zanntek is a product line of analytical nitrogen evaporators manufactured by Glas-Col, LLC. They are low cost,
small footprint instruments used for solvent and water evaporation. These units concentrate chemical and
biochemical solutions for further analysis, or evaporate to dryness for further reactions. Different Zipvap™ evaporators can be used with small 12 mm auto sampler vials or 62 mm dia. flasks, and 96 or 384 well plates. Sample sizes vary from micro liters to more than 100 ml. Two, Six, Eight, Twelve, Twenty, Twenty-Four, and Forty-Eight samples can be processed depending on the vial size and the manifold chosen. Temperature to 100o C. |
  |
| Specifications |
| Cat. No. | Model | Description | Input Voltage |
Max PSI |
Product Weight (lbs) |
| 109A 11-80021 | Zipvap 2 | 2-position evaporator for 61mm flasks, insert heated only, gas inlet not heated, with flowmeter. | 120 | 20 | 8 |
| 109A 11-80025 | Zipvap 2 | 2-position evaporator for 61mm flasks, insert and gas inlet heated, with flowmeter. | 120 | 20 | 8 |
| 109A 11-80081 | Zipvap 8 | 8-position evaporator for 28mm vials, insert heated only, gas inlet not heated, with flowmeter. | 120 | 20 | 8 |
| 109A 11-80085 | Zipvap 8 | 8-position evaporator for 28mm flasks, insert and gas inlet heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80121 | Zipvap 12 | 12-position evaporator for 18mm vials, insert heated only, gas inlet not heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80125 | Zipvap 12 | 12-position evaporator for 18mm vials, insert and gas inlet heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80185 | Zipvap 18 | 18-position evaporator for tubes up to 25mm, insert heated only, gas inlet not heated, no flowmeter. |
120 | 20 | 8 |
| 109A 11-80201 | Zipvap 20 | 20-position evaporator for 15mm vials, insert heated only, gas inlet not heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80205 | Zipvap 20 | 20-position evaporator for 15mm vials, insert and gas inlet heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80241 | Zipvap 24 | 24-position evaporator for 15mm vials, insert heated only, gas inlet not heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80245 | Zipvap 24 | 24-position evaporator for 15mm vials, insert and gas inlet heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80481 | Zipvap 48 | 48-position evaporator for 12mm auto sampler vials, insert heated only, gas inlet not heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80485 | Zipvap 48 | 48-position evaporator for 12mm auto sampler vials, insert and gas inlet heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80960 | Zipvap 96 | 96-position unheated evaporator for 96 well plate, with flowmeter. |
N/A | N/A | 4 |
| 109A 11-80961 | Zipvap 96 | 96-position evaporator for 96 well plate, insert heated only, gas inlet not heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80965 | Zipvap 96 | 96-position evaporator for 96 well plate, insert and gas inlet heated, with flowmeter. |
120 | 20 | 8 |
| 109A 11-80333 | Zipvap 96 | Triple position evaporator for (3) 96 deep well plates, gas heater and flow meters with on/off switches |
120 | 50 | 12 |
  |
| Cat. No. | Model | Description | Max PSI |
Product Weight (lbs) |
| 109A 11-06000 109A 11-06001 109A 11-06005 |
Barvap 6 | 6 position unheated bar evaporator, with six 4" bent needles, needle valve and 3' of 1/4" tubing 4" needles with plated metal hub, bent. Set of 6 1/4" OD x 1/8" ID silicone tubing - 3' piece |
40 | 2 |
| 109A 11-12000 109A 11-13001 |
Barvap 12 | 12 position unheated bar evaporator, with 12 - 4" bent needles, 2 needle valves and 2 - 3' pieces of tubing Aluminum Barvap holder for six 13mm diameter vials (nickel plated) |
40 | 5 2 |
| 109A 11-16001 109A 11-20001 |
Aluminum Barvap | Aluminum Barvap holder for six 16mm diameter vials
(nickel plated) Aluminum Barvap holder for six 20mm diameter vials (nickel plated) |
2 2 |
  |