Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
Sensors | Experimental Data Acauisition with Fully Autonomous Logger Sensors

Sensors | Experimental Data Acauisition with Fully Autonomous Logger Sensors

Product Code:Neulog


Need more Info? (514) 354-2511 - 1-800-463-4363

Features
  • Converts the measured parameter into a processed value (°C, °F, Lux, dB, mA, V, etc.)
  • Sends the data in digital form to a viewer unit, any kind of computer or tablet
  • Saves up to 5 experiments in its flash memory
  • Calibration is done by pressing a push-button
  • Changing ranges and gains is done through software
  • Experiments run with or without a computer
  • Saved experiments in the Logger Sensor can be uploaded to a computer at any time

 

Advantages over comparable systems in the market

   
 
  • The modular plug and play system allows the connection of sensors in a chain, in any order
  • Each sensor is in itself a full data acquisition system
  • Unbeatable value for money
  • Robust hardware and attractive design
  • Very simple operation
  • No cable clutter and therefore a very simple construction of experiments
  • System allows wireless connection

 

USB module USB-200
This NeuLog™ module enables a fast connection of the sensors to the computer. It operates with OSX, XP, VIsta and Windows 7.

The USB module is the first in a chain of sensors to connected to a USB port of the computer. It provides both power from the computer to the sensors and communication between the computer and the sensors.

The connection to the computer is done by using a standard USB - mini USB connecting cable (camera type). This cable is provided with the USB module.
RF Communication module RF-200
The RF Communication module allows remote operation of a single sensor or a chain of sensors. The remote single sensor or chain is connected to an RF Communication module and to a Battery Module which power them all.

Another RF Communication module should be connected directly to the Monitor Display Unit, or the computer via the USB module. More than two units can be used to carter for more cahins of snsors or more independent sensors.

The computer does not need to have either Bluetooth™ or Wi-Fi™ incorporated. Everything required is built  into the RF Communication Module.

Specifications:
Frequency: 2.4GHz DSSS (Direct-sequence spread spectrum)
Bit Rate: 1Mbps
Maximum distance of use in open place: 20m
WiFi module
The WiFi module is without doubts one of the most advenced and innovating elements of NeuLog. Measurement with NeuLog sensors can be performed through any device which uses the WiFi Technology, such as iPads and Tablets with Android, PC computers with Windows / Linux or Macintosh with OS. These can all communicate with the WiFi adaptor to begin a unique experience of data acquisition.

These is no need for any application download or software installation to take advantage of all the power of NeuLog sensors through wifi module.
Battery module Bat-200
The Battery module supplies power to a sensor, or chain of sensor, operating in the Off-Line mode, and to sensors connected to an RF Communication module.

The Battery module is rechargeable and can be recharged by connecting it to a computer's USB socket via the USB module cable.

The Battery module has a LED and a pushbutton switch, The LED indicates whether the battery is charged enough or not when pressing the pushbutton.
Digital display module View-200

The VIEW-200 is a small display module that can be connected to any chain of logger sensors working off-line with a Battery Module.

The VIEW-200 automatically searches for the connected sensors and displays one of them digitally. Scrolling the display of the reading od another sensor is donne by pressing the pushbutton on the module.

 

VIEW-101 - Graphic display unit
The Graphic Display unit (GDU) is used to run experiments without a PC. The GDUdisplays the sensor's measurements in digital and graphical forms.

It can also be used to program the sensor's experiment setup as well as viewing the input from up to five sensors at a time.

This unit has a user-friendly design with a color graphic display and touch screen.

The Graphic Display unit is used when a PC is not available for each group. It can work with up to 5 sensors in parallel.

Some of the module's features are:

  • Automatic recognition of sensors.
  • Uses preset experiment parameters for easy initiation.
  • Communicates with all the sensors or one at a time.
  • Controls each sensor's range and measurement units.
  • Internal charging circuit is incorporated.
  • Mode to view sensor values in real time – up to five at a time.
  • Automatic Power-Off for longer battery life.

Sensors are connected to the GDU via its USB (A) socket. Remote connection is also possible by plugging an RF Communication module into it and another into the sensor or sensor chain. This enables both setting up and analyzing the collected data. The VIEW-101 can be connected to a chain of sensors ending with the battery module connected to the last sensor of the chain.

When the GDU VIEW-101 receives power, it starts scanning and identifies the connected sensors. The located sensors are displayed on the left side of the screen.

 

Sensors
Please, see the .PDF below.

 

Convertisseur d'unités