Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
Syringe pump

Syringe pump

Product Code:Legato 100 & 180


Need more Info? (514) 354-2511 - 1-800-463-4363

The KDS Scientific Legato 100 Series is the next generation of syringe pumps. The series offers unparalleled ease of use through the high resolution color touch screen user interface. The full touch screen interface enables the user to quickly create configurations and recall them for easy use. The TFT color display presents all the pump operating parameters on an easy to view run screen.
 

KDS Legato model 100
Description
The password feature prevents accidental configuration changes ensuring the programs integrity is retained.

Programs can also be set to be started on a time delay for unattended operation.


An led light on the front panel makes it easy to see if the pump is running. Once the pump starts to run, theisplay shows the pump is running and the LED turns on. This will make it easy to see the pump's status.
 

 

Specifications
Non-Volatile Memory Stores all settings
Connectors IEEE-1394, 6 pos
RS-485 Type B
USB 15 pin D-Sub Connector
I/O & TTL mini phone jack
Footswitch 13.6 kg (30 lbs) @ 100% Force Selection
Linear Force (Max) 0.9° Stepper Motor
Drive Motor Microprocessor with 1/16 microstepping
Motor Drive Control 15,360
Number of Microsteps
per one rev. of Lead Screw
0.069 μm/μstep
Step Resolution 27.5 sec/μstep
Step Rate 26 μsec/μstep
Minimum 0.15 μm/min
Maximum 159.00 mm/min
Pusher Travel Rate: 12-30 VDC
Minimum 2.5mm ID x 5.5mm OD male plug
Maximum 159.00 mm/min
Input Power 12-30 VDC
Input Power Connection 2.5mm ID x 5.5mm OD male plug
Power Supply 100-240 VAC, 50-60 Hz, 8 Watts Universal
Power Supply, Use Only a KD Scientific
Approved Power Supply and Line Cord
Dimensions 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight 2.66 kg (5.9 lbs)

 

KDS Legato model 180
Description
The NEW Legato™ 180 picoliter syringe pump is ideal for microfluidics and low flow rate applications.

The KDS Legato 180 infuse only dual syringe is ideal for applications where dual syringes are required with small volumes under 10ml. The Legato 180 is the ultimate in preceision flow delivery. It offers the most stable flow delivery of all the Legato products.

The Legato 180 has a finer lead screw and a different pulley ratio from the Legato 101/111. It offers multi step programs, each with 50 steps.

The large touchscreen display allow sthe user to see all of the pumps operating parameters to ensure proper operation during the experiments.

Syringe size and flow rate are easily displayed as well as the volume delivered and the elapsed time.
Set up is easy using the icon driven software.

The Legato 180 is an infuse/withdraw syringe pump. It accommodates two syringes from 0.5 ul to 10 ml. Any type of syringe can be used in the unit including glass, plastic and stainless steel.

The syringes are held in place by KD Scientifics' new clamping mechanism designed to hold syringes securely in place. The run screen has all of the pump parameters, as well as, the pumps running conditions. The basic pump offers the same easy to use touch screen configuration and "run" screen as the more advanced Legato 200.

An led light on the front panel makes it easy to see if the pump is running. Syringe size and flow rates are easily displayed as well as the volume delivered and the elapsed time.

The pumps are versatile and can be connected through the RS485 interface. Advanced micro stepping techniques are employed to further reduce the step angle to eliminate flow pulsation. The accuracy is +_0.35% A wide dynamic flow range from pico liters per minute to millimeters per minute can be programmed into the pump. Add the New Adagio software to maximize the use of the pumps functions and features. Adagio allows you to configure the pump through the software as well as operate one or multiple pumps. In addition the National Instruments labview drivers are
available on their website.

KD Scientific pumps are acknowledged as the industry's highest values solution for delivering precise and smooth flow. KD Scientific is recognized worldwide for quality and reliability at an economical price and has the broadest line of syringe pumps to meet your specific application.

KD Scientific is committed to delivering the highest level of customer satisfaction, as well as technical support for all their products.

 

Features

•  Holds one or two syringes from 0.5 μl to 10 ml
•  Multi-step programming
•  Unparalleled ease of use
•  Password lock
•  LED light on front panel
•  Full metal chassis
•  Built in syringe table
•  Up to 30 lbs (5 kg) linear force
•  Built in RS-485 interface
•  USB port
•  Footswitch Interface
•  Spill dam
•  CE, UL, CSA, CB Scheme, EU RoHS

 

Applications

•  Microfluidics
•  Drug Discovery
•  Nanofluidics
•  Flow Cytometry
•  Mass Spec Calibrant
•  Organic Synthesis
•  Surface Plasma Resonance

 

Markets

•  Pharmaceutical
•  Biotech
•  Chemical
•  Neuroscience
•  Research and Development
•  Government
•  Petrochemical
•  Food and Beverage

 

Specifications
Syringe Size 0.5 μl to 10 ml
Power 100-240 VAC: 50/60 Hz, 50W. 0.5 A fuse
Motor Drive Control Microprocessor with 1/16 microstepping
Linear Force (Maximum) 13.6 kg (30 lbs) @ 100% Force Selection
Number of Microsteps per
One Revolution of Lead Screw
15,360
Step rate (Minimum) 27.5 sec/μstep
Step rate (Maximum) 26 μsec/μstep
Drive Motor 0.9° Stepper Motor
Pusher Travel Rate - (Minimum) 0.02 μm/min
Pusher Travel Rate - (Maximum) 71.55 mm/min
Flow Rate (Minimum) 0.540 pl/min (0.5 μl syringe)
Flow Rate (Maximum) 11.700 ml/min (1 ml syringe)
Dimensions 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in)
Weight 2.66 kg (5.9 lbs)
Connectors RS-232 - 9 Pin D-Sub Connector,
RS485 - IEEE-1394 6 pos,
USB - Type B

 

Tags: Syringe, pump

Convertisseur d'unités