Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
 
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Compact Potassium Ion Meter

Compact Potassium Ion Meter

Product Code:LAQUAtwin B-731


Need more Info? (514) 354-2511 - 1-800-463-4363

Only compact meter for a quick measurement of potassium ion using ion selective membrane.Flat sensor technology and 60 years of sensor engineering realizes a reliable and direct measurement of a drop of the sample from 0.3mL. Use sampling sheet (sold separately) to measure down to 0.05mL or more.Unique sensor mechanism realizes direct measurement of solid, viscous, powder samples. No need for a beaker to calibrate or measure. Just drop the standards and sample on the flat sensor, saves you time and minimize wasting your precious sample.This lightweight, pocket-sized meter is suitable for research and industrial applications in diverse fields.

Applications include:
Soil and sap testing for improved agriculture; food testing*

* Detection of ions in water only; electrolytes in oils cannot be measured. Ion measurement can be affected by non-target ions.
 

Functions
  • Autocalibration function recognizes standards and is user-selectable for either one- or two-point calibrations.
  • Auto range change
  • Temperature compensation
  • IP67 waterproof
  • Auto hold
  • Automatic power off (30 minutes)

 

Specifications
MODEL B-731
Measurement principle Ion electrode method
Minimum sample volume 0.3mL or more *1
Measurement range 39 to 3900 ppm(mg/L)(10-3 to 10-1 mol/L)
20 to 2000 kg/10a *2
Display range 0 to 9900ppm(mg/L) *3
Range and Resolution (Valid numbers)

① 0 to 1.0ppm : 0.1ppm
② 0 to 99ppm : 1ppm
③ 100 to 990ppm : 10ppm
④ 1000 to 9900ppm : 100ppm

Calibration Two-point *4
Accuracy ±10% of reading value. *5
Functions Auto range change
Temperature compensation
Reading locking
Automatic power off (30 minutes)
Display Custom (monochrome) Digital LCD
Operating temperature/humidity 5 to 40˚C, 85% or less in relative humidity  (no condensation)
Power CR2032 batteries (x2)
Battery life Approx. 400 hours in continuous use
Main Material ABS epoxy
Dimensions / Mass 164mm × 29mm × 20mm  (excluding projections) / Approx. 50 g (meter only, without batteries)
Accessories included
  • 2 CR2032 batteries
  • 1 Pipette
  • Instruction manual
  • Quick manual
  • Storage case/Standard solution
  • (150ppm&2000ppm) (14mL)
  • 5 pieces of Sampling sheetB
*1 Smaller amount(0.05mL or more) can be measured with the sampling sheet B.  (Please close the light shield cover. If a sample that contain particulate, please use ”Sampling sheet holder” (sold separately))
*2 With soil/water sampling ratio of 1:5.
*3 When the measured value is out of the measurement range, the displayed value blinks. It should be used only as a guide.
*4 Selectable between one-point and two-point calibrations.
*5 Repeatability in measurement of a standard solution after calibration using the same standard solution.
*6 IP67:no failure when immersed in water at a depth of 1 meter for 30 minutes. But the product can not be used underwater.

Attention : The ion electrode may be subject to interference from other ionic species. The selectivity coefficient reflects the affinity between each ionic species and the electrode, and is used to correct for the influence of competing ions. Please see the Interfering ion influence ・ pH range for further details.

 

Accessoires
  • Potassium Ion Sensor S030
  • Standard solution (Potassium Ion 2000ppm) Y031H
  • Standard solution (Potassium Ion 150ppm) Y031L
  • Sampling sheet B Y046
  • Sampling sheet holder (for LAQUAtwin) Y048

Convertisseur d'unités