These meters feature easy, push-button operation, a convenient HOLD function, and Auto-off function that shuts meter off after 20 minutes of non-use. Meters offer two modes of five-point calibration. For quick and easy calibrations, use automatic mode with preset calibration points at the most popular values. For more flexibility, calibrate in the manual mode and set your calibration point at any value.
Set-up functions let you customize automatic temperature compensation and cell constant. The protective rubber boot helps shield your meter from drops and dings, and features a built-in stand.
CON 6+ features automatic or manual ranging across five ranges for a wide variety of applications ranging from pure water to boiler blow down water.
|ConductivityRange||0.00 to 20.00 µS, 0 to 200.0 µS, 0 to 2000 µS, 0.00 to 20.00 mS, 0.0 to 200.0 mS|
|ConductivityResolution||0.01 µS, 0.1 µS, 1µS, 0.01 mS, 0.1 mS|
|ConductivityAccuracy||±1% full scale|
|TemperatureRange||-10.0 to 110.0°C|
|TemperatureCalibration||Offset 0.1°C increments|
|ATC||Automatic from 0.0 to 50.0°C|
|Power||4 1.5 V AA batteries, 100 hours continuous use|
|Cell constant||Selectable 0.1, 1, and 10|
|Temperature coefficient||Adjustable from 0 to 3% per °C|
|Dimensions||6 3/16" x 3 3/8" x 1 11/16" (15.7 x 8.5 x 4.2 cm)|
|Shipping weight||1 lb (0.5 kg)|
|WD-35604-04||CON 6+ meter kit with conductivity/TDS temperature probe (K= 1.0), protective rubber boot, calibration solutions, sample bottles, hard carrying case and batteries|
|WD-35604-00||CON 6+ meter with conductivity/TDS temperature probe (K= 1.0), protective rubber boot, and batteries|
|WD-35606-55||Conductivity/TDS temperature probe, K=1.0, 3-meter cable
WD-35606-57 Conductivity/TDS temperature probe, K=10, 3-meter cable
|WD-35606-53||Conductivity/TDS temperature probe, K=0.1, 3-meter cable|