Shopping Cart

0 item(s) - 0.00$
Your shopping cart is empty!
Drop us a line
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Thermo logger with real time clock reference

Thermo logger with real time clock reference

Product Code:DST nano-T world's smallest implantable temperature logger

Need more Info? (514) 354-2511 - 1-800-463-4363

Key features
  • Ideal for biomedical or animal welfare studies
  • Constant and accurate temperature measurements
  • Simple to use and cost effective
  • Multiple animals in a cage (biomedical studies)
  • Size only 17 mm x 6 mm, weighing only 1 g


The DST nano-T is the world's smallest temperature data logger. Recorded data is stored in the logger‘s internal memory with a real time clock reference for each measurement.

The DST nano-T is supported by the Mercury (and SeaStar) software and the Communication Box which serves as an interface between the logger and a PC.  Communication between the logger and the Communication Box is wireless.

In the software, the user sets the start time, start date and sampling interval before starting the recorder. Up to seven different intervals can be set for the same measurement sequence. This is especially useful when more frequent measurements are needed at a certain time period.

After recovering the DST, recorded data is uploaded in the supporting software where results are displayed both in graphic and tabular form. After retrieving the data, the DST can be re-programmed and reused as long as the battery lasts.

A set of Communication Box and SeaStar software needs to be purchased with the first order.


Examples of application
DST nano-T was designed  to be used as an implantable thermo logger for wild and captive animals. DST nano-T is made of biocompatible materials (alumina and biocompatible epoxy) and its size and shape are ideal for implantation in small animals. The logger can also be fitted in tight spaces, small packages or vials, for e.g. heat studies or temperature monitoring. With its waterproof housing and carefully chosen materials the DST nano-T can be used for collecting temperature data underwater or in other liquids (tolerates chemicals well).

The DST nano-T temperature logger is suitable for studies within:

  • Laboratory animal science
  • Preclinical research, stability and toxicology studies
  • Quality control (e.g. packaging)
  • Tagging of small fish and animals
  • Any use where ultra small and lightweight temperature recorder is required


Technical Specifications
Sensors Temperature
Size (diameter x length) 6 mm x 17 mm
Housing material Alumina and biocompatible epoxy
Weight (in air/in water) 1 g
Memory type Non-volatile EEPROM
Memory capacity 5,248 measurements / 7872 bytes
Memory capacity bytes 7,872 bytes / temp 1.5 byte
Memory management Custom programming
Data resolution 12 bits
Temperature resolution 0.032°C (0.058°F)
Temperature accuracy +/-0.2°C
Temperature range 5 to 45°C (32°F to 113°F)**
Temperature response time Time constant (63%) reached in 8 sec.
Data retention 10 years
Clock Real time clock, accuracy +/-1 min/month
Sampling interval User specified in second(s), minute(s) or hour(s)
Number of different sampling intervals Single interval throughout measuring period.
Or multiple intervals during the period.
-Up to 7 different intervals can be programmed.
Communications Communication box, RS232C 9 pin serial or USB
Battery life 14 months*
*With a sampling interval of 10 min at room temp. Non-replaceable batteries
**Outside ranges available upon request


Convertisseur d'unités