Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
Water Level Meter from Solinst

Water Level Meter from Solinst

Product Code:102


Need more Info? (514) 354-2511 - 1-800-463-4363

Laser Marked Water Level Meter Model 102
The Solinst Model 102 Water Level Meter is designed to measure groundwater levels, especially in small diameter tubes and piezometers, or where a flexible assembly is needed to get past down hole instrumentation. Also available from Solinst, are the Model 101 and 101B Water Level Meters, which feature easy-to-read, easily repaired flat tape. (See Model 101 Water Level Meter Data Sheets).

 

Operating Principles

The Model 102 Water Level Meter uses a choice of two small diameter probe designs, attached to a narrow coaxial cable, fitted on a sturdy ergonomically designed reel. A standard 9 volt battery, housed in an easy-access battery drawer, powers the Water Level Meter.

When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the cable at the top of the well casing or borehole.

A sensitivity control allows the buzzer to be scaled back orturned off while in cascading water, and ensures a clear signal in both high and low conductivity conditions.

 

Probes

Model 102 Probes are designed for flexibility. The probe tips use a recessed design to minimize false signals in cascading water. 
P4
0.157" dia. x 1.5" long (4 mm x 38 mm) stainless steel weighing 0.35 oz (10 g). It is ideal for accessing narrow
diameters, especially the channels of a Solinst CMT System.
P10
3/8" dia. x 2.75" long (10 mm x 70 mm) stainless steel with 10 stainless steel weights, weighing 6.14 oz (174 g). This heavier probe assembly is ideal for greater depths.

 

Laser Marked Cable
The coaxial cable has a durable polyethylene jacket with permanent markings precisely laser etched on the cable every 1/100 ft. or each millimeter. The cable reels smoothly, remains flexible, and comes in lengths from 100 ft. - 1000 ft. (30 m - 300 m). A braided copper outer conductor gives flexibility and a stranded stainless steel central conductor gives strength. It is easy to repair and splice.

 

Features
Low Cost Solinst quality at a low price
Narrow  0.157" (4 mm) diameter probe
Long life
  • Rugged, corrosion proof components
  • Strong, flexible cable, is easily spliced
  • Replacement probes, cables and parts
Accurate
  • Markings precisely every 1/100 ft. or mm
  • Traceable to national standards

 

 

Reels
The standard reel has an easy access battery drawer, a well designed brake assembly, and convenient carrying handle. It has been ergonomically designed to be comfortable in use and stable when placed on the ground. It has an on/off sensitivity switch, light, buzzer, battery test button, and comes with a tape guide. The mini reel is sturdy, yet very compact and easy to carry. It also has an on/off sensitivity switch, light, buzzer, and battery test button.

 

Lenght Options
Solinst Model 102 Water Level Meters are available on reels in the following standard lengths:
Small Reel 100 ft.  30 m
200 ft.  60 m
300 ft.  100 m
500 ft.  150 m
750 ft.  250 m
1000 ft.  300 m

 

Other Options
Carrying Bag: Small and mini padded nylon carrying bags are available, as optional extras. The bag design has a convenient shoulder strap, zippered front pocket, zippered top, and a grommet in the base to prevent moisture build-up. A mini bag has no pocket.
Replacement Parts: Replacement cables with probes, weights, and other spare parts are available.

 

 
Tape Guide/Datum
The tape guide can be used to protect the cable from damage on rough edges, help the probe hang straight in the well, and ensures consistent measurements. It can also provide reel support on the casing. A tape guide is provided with each standard reel.

 

 
 

Convertisseur d'unités