Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
Drop us a line
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Advanced PID benchtop temperature controllers from Oakton

Advanced PID benchtop temperature controllers from Oakton

Product Code:Temp 9500

Need more Info? (514) 354-2511 - 1-800-463-4363

Oakton® Temp 9500 Advanced PID Benchtop Temperature Controllers

  • Outlet receptacle allows for direct plug-in of heating devices such as hot plates, heat tapes, or mantles.
  • Features USB output and software with real-time graphing and simple setup of ramp and soak programming

These temperature controllers can be used for a wide variety of applications including pilot process plants, R & D labs, or for OEM requirements. Rear panel output receptacle for direct plug-in of heaters and other resistive devices. Field calibrations help to improve system accuracy by entering the offset value to correct for individual probe error.

Simultaneously view both the measured and set point on the two-line alphanumeric display.Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). Front panel LEDs indicate output and alarm conditions.

Advanced models feature heater output capacity of 1750/3450 watts max, ramp-and-soak profiling for more complicated processes, USB computer interface, free software that features real-time graphing and simple setup of ramp and soak progamming, alarm relay with adjusted hysteresis, and 4 to 20 mA and 1 to 5 V outputs for connection to a recorder or data logger. In addition to thermocouple inputs, advanced models also accept RTD and thermistor inputs.

The 115 VAC models include a 6-ft (1.8-m) power cord and US standard plug and receptacle; the 230 VAC models feature an IEC cord set and universal receptacle. Built-in grid support bracket allows the unit to be mounted onto a laboratory frame or grid.

Safety features—Output power to load device is automatically shut down in the event of a broken sensor or control loop break. Overtemperature protection shuts down the system if the user-settable over-temperature or timer is exceeded. Outlet power receptacle is fused separately from the controller for added safety. Audible and visual out-of-range alarms are also included.

Control type On/Off, Programmable PID, autotune PID
Ramp/Soak Yes
Temperature Sensor Thermocouple types J,K,T,E,N,B,R,S Thermistor with 1/4" phono plugs RTDs with 3-pin or Oakton/Digi-Sense connectors
OutputControl 4 to 20/20 to 4 selectable, 1 to 5 VDC
OutputCurrent 15 amps maximum


Control type on/off, programmable PID, autotune PID
Resolution 0.1°; 1° above 999.9° and below –99.9°
Accuracy Types J, K, T, E, and N: ±0.1% of reading, ±0.7°F (0.4°C) above –248°F (–100°C); ±0.1% of reading, ±2°F (1°C) below –248°F (–100°C) Types B, R, and S: ±0.1% of reading, ±1.8°F (1.0°C) Thermistors and RTDs: ±0.1% of reading, ±0.7°F (0.4°C) 
Display LCD
Digital output USB
Operating ambient 32 to 104°F (0 to 40°C); 0 to 90% RH, noncondensing
Control output powered receptacle rated for 115/230 VAC, 15 A max
Alarm output one SPDT relay rated for 230 VAC, 2 A max; resistive
(W x H x D)
8" x 33/4" x 9" (20.3 x 9.5 x 22.9 cm)   


Model # Description
WD-89800-03 Temp 9500 Advanced Controller 115 VAC 
WD-89800-04 Temp 9500 Advanced Controller 230 VAC 



Convertisseur d'unités