Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
Centormeter W/H, torque screwdrivers and torque wrenches calibrator Material Testing

Centormeter W/H, torque screwdrivers and torque wrenches calibrator

Product Code:


Need more Info? (514) 354-2511 - 1-800-463-4363

The CENTOR Meter W/H torque screwdrivers calibrator enables verification of torque wrenches thanks to a series of reference sensors ranging from 3 to 1400 Nm.

Each sensor is instrumented with the adaptations necessary to fix it and connect it to the electronic measurement instrument.

The calibrator calculates the triggering peak and enables a table of values to be filled in the memory; the table can then be transmitted to a computer via the RS232 output.

With the latest version of the CENTOR Meter W/H, you can control the torque on power screwdrivers. This applies to electric, pneumatic and hydraulic screwdrivers, whose speed of rotation can be adjusted up to 3 000 RPM. CENTOR Meter W/H traces a curve, which enables the increase in torque to be displayed instantaneously. Each base unit is fitted with a main sensor and can be fitted with extra sensors, which are recognised automatically without any manual intervention.precision of the Centor instrument family, which are specially designed for mobile use in a production workshop.
 

Features
  • Accuracy: 0.5 % FS
  • Sampling Rate: 1,000 hertz
  • Peak calculations in both directions
  • Simultaneous display of the peak and the current reading
  • Large back-lighted graphic screen
  • Operates in clockwise and anti-clockwise direction
  • Bar graph value display
  • 4 units available: Nm, mNm, kg cm, lbs inch
  • Auto-off adjustable from 5 to 15 min, can be desactivated
  • Two-way RS232 output: transmission of the current reading, minimum
  • Digimatic output
  • Automatic recognition of additional sensors
  • Operates on fast rechargeable batteries
  • 8 hours of operation without recharging
  • Large base to be fixed
  • The system includes a CENTOR STAR display and a calibration certificate

 

Version H (torque screwdriver calibrator) for small capacities

 

Version W (torque wrench calibrator) for bigger capacities

 

Additional sensors
In order to measure diffferent capacities, all additional sensors can be used with the main unit. Each sensor is instrumented with the adaptations necessary to fix it and connect it to the electronic measurement instrument. Included Sensor and base plate, SPIP connector and Calibration certificate.

 

Convertisseur d'unités