The pencil hardness test, also referred to as the Wolff-Wilborn test, uses the varying hardness values of graphite pencils to evaluate a coating’s hardness.
The Elcometer 501 has been designed to ensure that the cylindrical pencil lead is maintained at a constant angle of 45° and exerts a force of 7.5N (1.68lbF).
The pencil lead, prepared beforehand using the special sharpener and abrasive paper, is inserted into the Elcometer 501 and pushed over the smooth, flat coated surface. The lowest hardness value of the pencil which marks the coating determines the coating’s hardness rating.
|Hardness can be defined as a material’s resistance to permanent deformation.
In the coatings industry, hardness measurement can be used to determine the resistance of the coating to scratching from general wear and tear and also if a coating is fully cured.
The term “Hardness” is used to refer to different properties of material, specifically:
Depending on the requirements, there are various methods for testing hardness. Some are dedicated to characterise coatings and others are more suitable for testing bulk materials such as metals, plastics, rubber or elastomers.
|Can be used in accordance with:|
Standards in BOLD have been superceded but are still recognised in some industries.
|130 x 130 x 50mm (5 x 5 x 2”)|
|Part Number||H501----1 Elcometer 501 Pencil Hardness Tester|
|Packing List||Elcometer 501 Pencil Hardness Tester, pencil set (14 pencils, grades 6B - 6H), positioning block, x2 pencil sharpener, abrasive paper block, carry case and operating instructions|
|Pencil Sharpener (6H to 2B)||T99923040-1|
|Pencil Sharpener (3B to 6B)||T99923040-2|
|Set of 14 Pencils (6B to 6H)||T99923039|
|12 Hardness Pencils (6B)||T99923042-1||12 Hardness Pencils (F)||T99923042-8|
|12 Hardness Pencils (5B)||T99923042-2||12 Hardness Pencils (H)||T99923042-9|
|12 Hardness Pencils (4B)||T99923042-3||12 Hardness Pencils (2H)||T99923042-10|
|12 Hardness Pencils (3B)||T99923042-4||12 Hardness Pencils (3H)||T99923042-11|
|12 Hardness Pencils (2B)||T99923042-5||12 Hardness Pencils (4H)||T99923042-12|
|12 Hardness Pencils (B)||T99923042-6||12 Hardness Pencils (5H)||T99923042-13|
|12 Hardness Pencils (HB)||T99923042-7||12 Hardness Pencils (6H)||T99923042-14|