Shopping Cart

0 item(s) - 0.00$
Your shopping cart is empty!
Drop us a line
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
QuikSert Gas Flowmeter

QuikSert Gas Flowmeter

Product Code:

Need more Info? (514) 354-2511 - 1-800-463-4363

When gases need to be measured, look no further than the accurate, rugged Gas QuikSert® meter. This meter provides long service life by offering a durable construction design composed of stainless steel and tungsten carbide shaft and bearings. The unique wafer style design allows for quick installation and easily fits between two flanges. Gas QuikSert® is fully compatible with B2800 Flow Monitors, K-Factor Scalers, Intelligent Converters, and the new B3000 series of flow monitors; pre-configured when purchased together. Gas QuikSert® is compatible with most instruments, PLC’s and computers.

Features and Benefits
  • Consistent, reliable gas flow measurement.
  • Wafer mounting configuration for limited space requirements.
  • Light weight, balanced rotor provides instantaneous response to changes in flow.
  • No mating flange design allows for quick and easy install.
  • Superior material of construction for high performance in aggressive environments.




Certification / Compliance


Dimensional Specifications
Flow Meter Repair Kit
Hardware Kit


Installation Mounts between two 2" ANSI raised face flanges, ideally sized for 2-inch schedule 40 or 80 pipe;
horizontal or vertical orientation
Working Pressure Vacuum to 2,220 PSIG (15.3 MPa) maximum
Pressure Loss 3 inches of water column (7.5 mbar) maximum (dry air)
Temperature -40 to +330 ºF (-40 to +165 ºC)
Linearity ±2% of reading over the specified measuring range (see Part Number Construction table below)
±1% of reading when integrated with a properly configured Blancett flow monitor or signal conditioner
Repeatability ±0.5% of reading
Output Signal 100 mVpp minimum (with Blancett B111113 magnetic pickup installed)
Nominal K-Factor See Part Number Construction table below
Materials of
316/316L, 410 and 304 grade stainless steels, tungsten carbide
Certifications Intrinsically Safe: Class I Division 1 Groups C, D [Entity Parameters Vmax = 10V, Imax = 3 mA,
Ci = 0 μF and Li = 1.65 H with Blancett B111113 magnetic pickup installed] for US and Canada.
Complies with UL 913 and CSA 22.2 No. 157-92

Explosion-Proof: Class I Division 1 Groups C, D. Complies with UL1203 and CSA C22.2
No. 30-M1986

Single Seal: complies with ANSI/ISA 12.27.01-2003


Part Number Construction
Flow Meter* Flow Rate K-Factor Repair Kit*** Hardware Kit
ACFM** MCFD Pulses/ft³ (Pulses/m³)
B142-20L 7 - 70 10 - 100 365 (12,900) B142-20L-KIT B142-20-150KIT
B142-20M 14 - 210 20 - 300 190 (6,710) B142-20M-KIT
B142-20H 35 - 350 50 - 500 85 (3,000) B142-20H-KIT
* Does not include magnetic pickup. Order Blancett B111113 Low Drag Pickup
** At 0 PSIG (0 Bar) and 60 ºF (15.6 ºC)
*** Compatible with Cameron/NuFlo 2" wafer gas meter


Convertisseur d'unités