|Product Code:||1700°C Independent Control|
Research and Pilot Plant Production
The General Purpose 1700°C Box Furnace with independent control are designed for applications which require extremely rapid heat-up rates, with 3500 watt models reaching 1700°C in as little as 15 minutes. Choose from two popular chamber sizes, each with a fully programmable independent controller (ordered separately, see specification chart).
|Smart heating elements|
|Model||Independent Controller||Electrical, 1Ø||Watts||Int. (WxF-BxH)||Ext. (WxF-BxH)||Ship Weight|
|Temperature range 500°C to 1700°C|
|BF51314C||CC59246PCOMC||208/240V, 50/60Hz||3500||5 x 6 x 5 in.
12.7 x 15.2 x 12.7cm
|16 x 16 x 14 in.
40.6 x 40.6 x
|BF51324C||CC59256PCOMC||208/240V, 50/60Hz||3500||8.5 x 10 x 6.5 in.
21.6 x 25.4 x 16.5cm
|19.5x19.5 x 15.75 in. 49.5 x 49.5 x
|1700°C Controller, Programmable, with Communications|
|The 1700°C Programmable Controllers provide 300 programmable segments for a variety of ramp (up and down) and dwell (timed holds) settings. Controller will accept up to 30 individual programs with up to 99 segments per program. The controller visually displays ramp rate, dwell time, program segment and percent power output. A holdback feature allows the operator to set a -process vs. setpoint" temperature value which, when exceeded, holds the program to allow the process to catch up.
The controller includes an advanced self-tuning feature which automatically sets the best PID settings for the thermal process. Two LED displays simultaneously indicate actual temperature and setpoint temperature. High limit overtemperature protection is standard. The control console includes a circuit breaker, power module, transformer and cooling fans.
Includes RS485 data port (communications card and port) for connection to remote computer, allowing modification, interrogation and data transfer of all instrument control and configuration parameters. Software not included, but is available as an accessory.
Option B Overtemperature Control (OTC) Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via signal from independent thermocouple
|With Overtemp. Control|
|Electrical Volts, Hz||208/240V, 50/60Hz|
|Ext. (WxF-BxH)||21 x 15 x 10 in.
(53.3 x 38.1 x 25.4 cm)
|Ship Weight||115lb (53kg)||115lb (53kg)||130lb (59kg)||130lb (59kg)|