|These electrically heated ovens come in five sizes with features to provide a low particle count Class 100 atmosphere inside. Operating temperatures to 500°F with work space volumes ranging from 57.8 to 163.6 cubic feet. Exterior construction minimizes particle generation. Heavy duty units equally suited for pharmaceutical or industrial applications.|
• UL LISTED CONTROL PANEL
• Class 100 Construction
—Recirculation HEPA filter, stainless steel, high temperature, 99.97% efficient on 0.3 micron particles
—Stainless steel recirculating blower
—Silicone rubber blower shaft seal
—Stainless steel interior — type 304, 2B finish
—Continuously back-welded seams on oven interior
—Easy to remove interior duct work for cleaning
—Incoloy sheathed tubular heating elements
—Test port upstream of HEPA filter
—Positive latching door hardware
—Silicone rubber door seal
—Sealed penetrations for heaters and thermocouples
—Adjustable fresh air inlet — optional HEPA filter with — prefilter available
—Adjustable exhaust outlet — optional HEPA filter available
—Insulated floor with removable truck wheel guides
—Brushed stainless steel control panel face and door cover
—Aluminized steel exterior with white epoxy paint — optional brushed stainless steel exterior available
—1 year limited warranty
• Every oven fully assembled and individually factory tested
— 208 volts, 3-phase, 60 Hz
— 230 volts, 3-phase, 60 Hz
— 460 volts, 3-phase, 60 Hz
— Other electrical characteristics available
These Class 100 ovens come in five sizes and include insulated floors with removable truck wheel guide tracks. They feature full horizontal air flow and adjustable opposed louvers on full coverage supply and return duct work. Easily removable
UL listed control panel enclosing terminals for incoming power, temperature controllers, push buttons and pilot lights. Motor starter and solid state heating element relay electrically interlocked to shut off heaters if power to blower is interrupted and to permit operation of blower without heat for cooling. Incoloy sheathed tubular heating elements. Exhaust outlet 4" diameter.
Stainless steel (type 304, 2B finish) interior with continuously back-welded seams. Recirculated air flow is continuously passed through high temperature HEPA filters to remove particles. High temperature HEPA filters have stainless steel housing and are 99.97% efficient on 0.3 micron particles.Mechanical enclosure covers recirculating blower motor, heating element terminal box, air flow safety switch and other components to provide continuous exterior surface for easy cleaning.
Outer door cover and control panel face constructed from #4 brushed finish, type 304 stainless steel. Aluminized steel exterior finished with white epoxy enamel paint.Optional loading trucks hold nine(9) shelves on 6" vertical centers and are all welded stainless steel construction including stainless steel casters. Loading trucks are moved to and from oven on optional transfer dollies.
|CAUTION: OVENS PROCESSING COMBUSTIBLE MATERIAL ARE REQUIRED BY NATIONAL FIRE PROTECTION ASSOCIATION STANDARD 86 TO HAVE A FIRE SUPPRESSION SYSTEM. IF FLAMMABLE SOLVENTS OR VAPORS ARE PRESENT IN AN OVEN, OSHA REQUIRES CONFORMANCE WITH NFPA 86 WHICH DEFINES OVENS FOR THESE APPLICATIONS AS CLASS A OVENS. A POWERED FORCED EXHAUSTER AND OTHER NON-STANDARD SAFETY EQUIPMENT MUST BE ADDED. SEE BULLETIN TC-940 AND CONSULT FACTORY.|
|Additional Equipment Available|
• Companion Trucks and Shelves
‡Models TLD-500 and TLE-500 hold two trucks front to rear.