Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
Oven | Asphalt Rolling Thin Film Oven

Oven | Asphalt Rolling Thin Film Oven

Product Code:


Need more Info? (514) 354-2511 - 1-800-463-4363

These ovens are used for measuring the effect of heat and air on a moving film of semi-solid bituminous materials. The internal chamber is made from stainless steel, insulated with fiberglass or similar, with an external frame made from engine-turned stainless steel and a door with a centrally located window. Special attention has been given to the safety features which conform to CE requirements. The oven is supplied complete with flow meter, ASTM 13C thermometer and 8 heat resistant glass containers (64 mm high x 140 mm diameter). The oven must be connected to a compressed air source supplying 2 bar maximum pressure. If not available in the laboratory we recommend the 81-PV0161/11 Diaphragm pump. See accessories.

The ASTM and EN versions are basically identical except for a small difference of the internal dimensions of the testing chamber.
 

  • Power: 3000 W
  • External dimensions: 600 x 600 x 900 mm (w x d x h)
  • Weight: Approx.50 kg
     
Main Features
  • Safety features: Automatic over-temperature switch, door switch, pilot lamp and alarm for door open with fan still running; magneto-thermic switch; 24V low voltage door opening control
  • High quality stainless steel structure, internal and external engine-turned finishing
  • Door with double-glazed window
  • Armoured heating resistance conforming to safety requirements
  • Flow meter included
  • Digital electronic thermoregulator operating in PID mode

 

Ordering information
ASTM/AASHTO versions:
  • 81-PV0161
    • PAVELAB RTFOT, Bitumen oven for rollingthin film oven test. ASTM version. 230 V, 50 Hz, 1 ph.
  • 81-PV0161/Z
    • As above but 110 V, 60 Hz, 1 ph.
  • 81-PV0161/Y
    • As above but 220 V, 60 Hz, 1 ph.
EN version:
  • 81-PV0161/A
    • PAVELAB RTFOT, Bitumen oven for rollingthin film oven test. EN version. 230 V, 50 Hz, 1 ph.

 

Accessories
Diaphragm pump
  • 81-PV0161/11
    • Diaphragm pump 6 litres/min at 2.4bar. 230 V, 50 Hz, 1 ph
       
  • 81-PV0161/11Z
    • As above but 110 V, 60 Hz, 1 ph.
       
  • 81-PV0161/11Y
    • As above but 220 V, 60 Hz, 1 ph.
Description
Free air displacement 6 litres/min, maximum pressure 2.4 bar (when used as an air compressor), ultimate vacuum 100 mbar (when used as a vacuum pump). Complete with needle valve. Power: 65W Weight: approx. 1.9 kg
Spares
  • 81-PV0161/10
    • Spare glass container
       
  • 81-PV0160/10
    • ASTM 13C Thermometer, +155 to +170° C, 0.5° divisions.

 


 

Convertisseur d'unités