Shopping Cart

0 item(s) - 0.00$
Your shopping cart is empty!
 
Drop us a line
Contact
 
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Resistivity Meter OhmCorr C-RM-8000

Resistivity Meter OhmCorr C-RM-8000

Product Code:C-RM-8000


Need more Info? (514) 354-2511 - 1-800-463-4363

Features and Benefits
  • Assesses damaging corrosion currents in concrete.
  • Economic and easy to use.
  • Direct digital readout of resistivity.
  • Measuring from two small holes avoids the problems and errors of surface measurements.
  • Used in conjunction with CorMap System to produce resistivity plots.

Technical Specifications
The electrical conductivity of concrete is an electrolytic process that takes place by the movement of ions in the cement matrix. This ionic movement will occur when contaminants such as chloride ions or carbon dioxide are introduced into the cement mortar matrix.

A highly permeable concrete will have a high conductivity and low electrical resistance. Because resistivity is proportional to current flow, the measurement of the electrical resistance of concrete provides a measure of the possible rate of corrosion. Since carbonation seriously affects surface resistance, measurement on the concrete surface should be avoided.

The James resistivity meter, OHMCORR, has two probes spaced 5 cm (1.97 inches) apart which are placed in two holes drilled to a depth of 8 mm (3/8 inch) and filled with conductive gel. The concrete resistivity is displayed on an LCD when the control switch is activated.

The following table correlates a range of values vs. the possible rate of corrosion of the reinforcement bars.

RESISTIVITY LEVEL
(K OHMS CM)
POSSIBLE CORROSION
RATE OF REINFORCEMENT REBARS
<5
Very High
5 to 10
High
10 to 20
Moderate to Low
>20
Insignificant
The James OHMCORR, when used in conjunction with the James CORMAP System provides an economic and sound means of diagnoses of corrosion in reinforced concrete.

Sales Numbers Specifications
C-RM-8000 Complete System:
C-RM-8030 Electronic Meter
C-RM-8040 Probe
C-RM-8042 One 10ft (3M) Cable with Connectors
C-RM-8045 3oz (85ml) Jar of Conductive Gel
C-RM-8055 1/4” Drill Bit
Weight complete in carrying case: 8 lbs (4 kilos)
Display: 41⁄4” Digit in LCD
Resolution: ± 0.1K ohms cm (± 1 Digit)
Battery: 9 Volt
Range: 0.5 - 20K ohms cm

 

 

Convertisseur d'unités