Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
Penetrometer digital microprocessor Material Testing

Penetrometer digital microprocessor

Product Code:


Need more Info? (514) 354-2511 - 1-800-463-4363

FEATURES
Automatically timed penetrations
  • Programmable operator between 0-9999.9 seconds with increments of 0.1 seconds
  • Automatic repetition of penetration selected intervals until changed by the operator.
  • Automatic default value of 5.0 seconds for ASTM intervals.
  • LCD displaying selected intervals and the countdown of the interval during the test.
  • Delay function: allows the operator to delay the release of the probe enters the sample for a predetermined period of time after pressing the switch-key. The period is then followed by the interval chosen penetration.
Options for full penetration scale and measurement / report
  • 0-620 measurement range to a scale of 1/10 mm
  • Optional scale measurement - one hundredth of a millimeter - selected by pressing a button.
  • A measurement of penetration outside this range causes an audible alarm and a visual display.
  • Automatic repeat of selected parameters until changed by the operator.
  • Communication via the RS232 interface with a printer or computer to test data reports
Simplified start up to the end of penetration
  • Four (4) programmable presets by operators to reduce the end of penetration into the surface to be measured.
  • Manual or coarse-grained control to lower or raise the penetrometer manually.
  • Pressing a touch key to bring the penetrometer head to an upper position after the measurement.
  • Automatic positioning of the end of penetration of the electrically conductive samples.
  • Magnifying lamp to facilitate monitoring of the implementation of the penetrometer in the sample.
Adding useful functions
  • A removable base allows the installation of the penetrometer head directly into a water bath or a laboratory bench.
  • Operates on a power supply of 115V / 220-240V or a battery pack (12V).
  • Lightweight (about 15 lbs / 6.81 kg)

 

SPECIFICATIONS
Complies with the following standard test methods
  • ASTM D5, D217, D937, D1321, D1403, D2884, D4950
  • IP 49, 50, 179, 310
  • ISO 2137
  • OF IN 51804, 51580, 51579
  • FTM 791-311, 791-312, 791-313
Penetration range 0-62.0 mm (penetration scale of 0-620) with digital readout for 1/10 mm (scale 1/100 mm optional)
Interval penetration Variable operator from 0.1 to 9999.9 seconds with automatic repeat function and a default value of 5.0 seconds
Test report (requires a printer)
  • Sample number
  • Interval penetration
  • Penetration depth
Supply 115 / 220-240 V (50/60 Hz)
Dimensions (LxLargexH) Base: 13 x 14 x 19 in. (33 x 35.6 x 48.3 cm)

 

ACCESSORIES
ASTM D5
K20500
Stainless steel needle, brass rod, 2.5g
 
K20570
Stainless steel needle, brass rod, 2.5g, NIST Certified
K20600
Stainless steel needle, stainless steel rod, 2.5g
K20670
Stainless steel needle, stainless steel rod, 2.5g, NIST Certified
K17720
Water bath for penetration, 115 V (50/60 Hz) (waxes and asphalt)
K17729
Water bath for penetration, 220-240 V (50/60 Hz)
ASTM D217
K20800
Magnesium cone with stainless steel tip reinforced 102.5g
 
K20000
Cone brass with stainless steel tip reinforced 102.5g
K19100
Grease knife block for penetration testing
K19600
Water bath for penetration, 115 V (50/60 Hz) (fats)
K19690
Water bath for penetration, 220-240 V (50/60 Hz)
K18000
Fat workbook tool
K18100
Mechanical working of fat tool, simple unit 115V (60 Hz)
K18110
Mechanical working of fat tool single unit, 220-240V (50 Hz)
K18119
Mechanical working of fat tool ,, 220-240V single unit (60 Hz)
K18190
Mechanical working of fat tool, double unit, 115V (60 Hz)
K18191
Mechanical working of fat tool, double unit 220-240 V (50 Hz)
K18192
Mechanical working of fat tool, double unit 220-240 V (60 Hz)
K18020
Work tool steel grease
ASTM D1321
K17700
Stainless steel needle, 2.5g
 
K17770
Stainless steel needle, 2.5g, NIST Certified
ASTM D1403
K20900
Cone scale shift in aluminum, 2.48g
 
K95519-00000
Diver (1/4 scale)
K20200
Cone half-scale stainless steel, 22.5 g
K95573-00000
Diver, 15 g (1/2 scale)
ASTM D2884
K19900
Cone magnesium, 15 g

 

INCLUDED ACCESSORIES
  • Standard diver, 47.5 grams
  • Weight, 50 and 100 grams

 

CAT. NO. DESCRIPTION
K95500-00000 Penetrometer digital microprocessor, 115 V (60 Hz)
K95590-00000 Penetrometer digital microprocessor, 220-240 V (50/60 Hz)

© 1997-1998 Geneq inc. All rights reserved.

Convertisseur d'unités