Your shopping cart is empty!
- Contact Us
|Product Code:||TG200 from Retsch|
pharmaceuticals, compost, refuse derived fuels, residual waste, splints, saw dust, soils, leaves and conifers, silage, leather, plastic granules, cellulose, coal and coke
|Feed material||bulk materials and solids, >63 µm|
|Time setting||continuously adjustable, 0 - 99 min or continuous|
|Temperature control||continuously adj., 40 - 150 °C (dependent on air throughput rate)|
|Drying time||5 - 20 min, depending on product, quantity, moisture content|
|Container volume||1 x 6 litres or 3 x 0.3 litres|
|W x H x D||400 x 580 x 440 mm|
|Net weight||approx. 21 kg|
|*depending on feed material and instrument configuration/settings|
Drying in the Fluid Bed Dryer TG 200 makes use of the fluidized bed process, a technique similar to the one used in large industrial dryers. Ambient air is drawn in through a filter. A blower moves the air across the heating elements, and ultimately forces it through the perforated plate and into the detachable drying container. The solid particles are blown upward and dispersed and thus kept separate from one another. This helps to avoid a caking and sticking of the particles as it often occurs when other drying methods are used.
The air stream extracts moisture from the particles and then exits through the filter bag in the cover. Using the quick-clamp cover with the filter fleece insert is advisable when dealing with products finer than 100 ?m in diameter. The 1000 watt blower provides an air volume of 185 m3/h at idle speed; heater output is 2000 watts. The air volume, heating power and temperature are infinitely adjustable. Temperature control is effected using he display gauge.