Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
Temperature, Humidity and CO2 Datalogger Environment

Temperature, Humidity and CO2 Datalogger

Product Code:7001 D


Need more Info? (514) 354-2511 - 1-800-463-4363

Equipped with Telaire's patented dual beam Absorption Infrared® technology, the Telaire® 7001D Combines the easy-to-use Telaire® 7001 with a pocket-sized Hobo® datalogger from Onset Computer Corporation. The Telaire® 7001D is designed for use in residential or commercial applications and now has the ability to calculate and display the cfm/person ventilation rate as well as record CO2, temperature, and RH data over time. The Telaire® 7001D is th eideal tool for identifying energy saving opportunities in over-ventilated spaces, determining if air quality complaints are due to insufficient ventilation, or locating th epresence of combustion fumes generated from vehicles and appliances. The Telaire® 7001D comes with everything you need to record CO2, temperature, and relative humidity data and graph the information on a PC.

 

SPECIFICATIONS Telaire® 7001
Method Dual Beam Absorption Infrared™
Sample Method  Diffusion or flow through (50-100 ml/min.)
Warranty  18 months parts and labor
Performance
CO2, channel Measurment Range  0-4,000 ppm voltage output/0-10,000 ppm display
Sensitivity  ± 1 ppm
Accuracy  ± 50 ppm or ± 5% of reading, whichever is greater
Repeatability  ± 20 ppm
Temperature Dependence ± 0.1% of reading per °C or ± 2 ppm per °C, whichever is greater, referenced to 25°C
Pressure Dependence 0.13% of reading per mm Hg (corrected via user input for elevation)
Annual Drift  ± 20 ppm typical
Response time  <60 seconds for 90% of step change
Warm-up time <60 seconds at 22°C
Operating Conditions  32-122 °F (0-50 °C)/0-95 RH, non-condensing
Storage Temperatures  -40 to 140°F (-40 to 60 °C)
Calibration interval 12 months offset adjustment using singles gas at 0-1000 ppm CO2. Full factory calibration available
Temperature Channel
Temperature Range

Voltage output: 32 to 104°F (0 to 40°C)

Display: 32 to 122°F (0 to 50 °C)

Display Resolution  0.1 °F (0.1 °C)
Display Options  °F, °C, or Off. Set with panel button.
Accuracy ± 2 °F (± 1 °C)
Response Time 20-30 minutes (case must equilibrate with environment)
Calibration Interval  12 months, offset adjustment using temperature standard at 50 to 86°F (10 to 30 °C). Full factory calibration available.
Output-Analog
CO2 0-4 VDC, 1mV/ppm (4,000 ppm max)
Temperature  0-4 VDC, 1mV/ppm (0-40 °C)
Output Independance  100 Ohms
Wiring connection  Via Rj-45 to DB9 serial port cable (for use with CO2View™ PC Graphing Software)
SPECIFICATIONS-DATALOGGING KIT
Temperature (internal sensor)
Range  -4°F to + 158 °F Range for internal sensor when used outside of case: -40 °F to + 158 ° (-40 °C to + 120 °C)
Accuracy  ± 1.27 º F (± 0.7 ±C) at + 70 º F
Resolution  0.7 º F (0.4 ºC) at 70 º F
Response time  still in air 15 min. typical with sensor inside case; i min. typical with sensor outside case.
Relative Humidity (User-replaceable RH sensor)
Range 25% to 95% RH at +80ºF for intervals of ≥ 10 seconds, non-condensing and non-fogging, see plot below
Accuracy  ± 5%
Response time  10 min. typical in air
Sensor operating Environment  + 41°F to + 122°F non-condensing and non-fogging
External Input  Acceots the following sensors: Wide range of temp sensors (TMCx-Hx series). Split-core CTs for AC current (5 models). 4-20 mA input cable (CABLE-4-20 mA). 0-2.5 V DC input cable (Cable-2.5-Stereo)
External 2.5 Volt Input
2.5 mm jack  External input ground, input, switched 2.5 V output; external input ground connection is not the same as PC interface connection ground and should not be connected to any external ground.
Input Range 0 to + 2.5 Volts DC
Accuracy ±10 mV ± 1% of reading
Resolution 10 mV (8-bits)
Out Power + 2.5 Volts DC at 2 mA, active only during measurments
7001 SPECIFICATIONS
Display  LCD with independant CO2/Temperature readings (panel buttons set elevation, °F/°C, calibration functions)
Power Supply
Battery Type  Four AA batteries, not included
Battery Operation  80 hours (alkaline)
External 6 VDC from external AC/DC adapter, included
Power Requirements 100 mA Peak, 20 mA average from 6V
Certification FCC Class 15 Part B
ACCESSORIES/ORDERING INFORMATION
2075 Calibration Kit  Come with regulator, tubing and gas. The kit can perform up to 20 calibrations.
2080 CO2 View™  Graphing Software for logging CO2 concentrations directly to a PC
APPLICATIONS
• Identify Areas with low or substandard ventilation
• Identify Hidden energy savings in over ventilated spaces
• Determine if ventilation is a factor in air quality complaints
• Locate the presence of combustion fumes from vehicles and appliances
• Use as a reference to calibrate wall mounted CO2 sensors

About the CFM/Person Ventilation Rate Measurment

The 7001 will calculate the outside air ventilation rate to a space based on the inside/outside CO2 differential readings. Outside readings can be established by measuring outside levels and holding the "enter" button on the sensor for 5 seconds. The outside reading can also be manually set using the - on-board keypad and display (default 400 ppm).Accurate interpretation of the Ventilation Rate Indicator requires a measuring 2 to 3 hours after occupancy has stabilized in a space or at a peak in daily CO2 concentrations. In other conditions the indicator may tend to over estimate ventilation rates. The ventilation Rate display assumes a people activity level in the measured space similar to an office type environment (1.2MET). If higher levels of activity are present the indicator may tend to under estimate ventilation levels.

 

Convertisseur d'unités