Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
 
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Single Test Colorimeter Environment

Single Test Colorimeter

Brand:LaMotte
Product Code:1200


Need more Info? (514) 354-2511 - 1-800-463-4363

The Model 1200 Series of single test, direct reading colorimeters incorporates design advances that enhance reliability, improve accuracy, and simplify the calibration process, all in a portable, hand-held package.

 

  • Field & Lab Use: An optional AC adapter is available to save battery life when in the laboratory.
  • Large Display: The large 3 digit display presents measurements in absorbance, and indicates low battery warnings.
  • RS-232 Interface: An RS-232 port is provided to interface with a datalogger or computer.
  • European CE Mark: The 1200 has been independently tested and has earned the European CE Mark of compliance for electromagnetic compatibility and safety.
  • EPA Compliant: Employing the proper wavelength and the DPD test method, the 1200 Chlorine Colorimeter Kit meets or exceeds EPA design specifications for NPDWR and NPDES chlorine monitoring programs (EPA 330.5 and Standard Method 4500).
  • 0-4 ppm Chlorine: No need to select a low or high range. The 1200 covers the entire critical chlorine range of 0-4 ppm with a 0.05 sensitivity.
  • A Great Value: Complete, economical package! The 1200 Chlorine Colorimeter Kit comes with enough tablets for 100 tests or liquid reagents for 140 tests, six sample vials with screw caps, instruction manual, and sturdy carrying case. * Water Resistant Design: Designed with excessive exposure to moisture in mind, the 1200 colorimeters deliver trouble-free performance in the field and lab.
  • Improved Accuracy: The microprocessor enables the factory programmed calibrations to optimally match non-linear curves.
  • Auto-Zero: Simply insert the sample blank and press the zero key. No more dialing in the zero.
  • Hinged Light Cover: Flip-top lid over sample chamber prevents any stray light, especially in the field, and avoids misplacing separate light caps

 

Specifications

Instrument Type: Single wavelength, direct-reading colorimeter
Display: 3-1/2 digit LCD
Photometric Precision: ±0.001 Absorbance Unit
Detector: Silicon Photodiode
Sample Chamber: Accept 25mm flat-bottomed glass vials with screw caps
Light Source: LED
Interface: RS-232 serial interface, 8 pin mDIN, 9600b, 8 data bits, 1 stop bit, no parity
Power: Battery Operation: Alkaline 9-volt DC battery
Line Operation: 120V/60Hz, 220V/50Hz with adapter
Size (LxWxH): 15 x 8 x 5.5 cm; 6 x 3-1/4 x 2-1/2 inches

 

Cat. No. Test Factor Description
LAM3680 Ammonia Nitrogen In this Ammonia Nitrogen test kit, Nessler's reagent reacts with ammonia to form a yellow to brown color and levels are determined using a Colorimeter. Range and sensitivity is 0-5 ppm/0.05 ppm NH3-N.
LAM3672 Bromine This test kit measures Bromine using DPD Tablets and the 1200 Colorimeter. Range and sensitivity is 0-7.0 ppm/0.05 ppm Br.
LAM3671 Chlorine Dioxide This test kit measures Chlorine Dioxide levels using DPD tablets and readings from the 1200 Colorimeter. Range and sensitivity is 0 to 7.0 ppm Chlorine Dioxide.
LAM3671LI Chlorine Dioxide This test kit measures Chlorine Dioxide levels using DPD liquid and readings from the 1200 Colorimeter. Range and sensitivity is 0 to 7.0 ppm Chlorine Dioxide.
LAM3673 Copper This kit tests for copper using the DC1200 Colorimeter. Range and sensitivity is 0-8 ppm/0.03 ppm Cu.
LAM3674 Fluoride This kit tests for fluoride using the DC1200 Colorimeter. Range and sensitivity is 0-2.0 ppm/0.03 ppm Fl-.
LAM3681 Iron This kit tests for Iron using the 1200 Colorimeter for iron. Range and Sensitivity is 0-4.0 ppm/0.25 ppm Fe.
LAM3682 Manganese This kit tests for manganese using the 1200 colorimeter for manganese. Range and sensitivity is 0-0.9 ppm/0.01 ppm Mn.
LAM3676 Molybdenum This kit tests for Molybdenum the Dropper Pipet method. Range and sensitivity is 1 drop = 2 or 20 ppm Molybdenum.
LAM3677 Nitrate Nitrogen This kit tests for Nitrate Nitrogen using the 1200 Colorimeter. Range and sensitivity is 0-3.0 ppm/0.05 ppm NO3- -N.
LAM3678 Ozone This kit tests for ozone using the 1200 Colorimeter for ozone. Range and sensitivity is 0-0.4 ppm/0.04 ppm O3.
LAM3598 Ozone (Without other oxidizers) This kit tests for ozone using the 1200 Colorimeter for ozone. Range and sensitivity is 0 to 3.0mg/L Ozone
LAM3679 Phosphate This test kit measures Phosphate using the 1200 Colorimeter. Range and sensitivity is 0 to 3.0 ppm Orthophosphate (Range can be extended by dilution).
LAM3683 Sulfate This kit tests for Sulfate using the DC1200 Colorimeter. Range and sensitivity is 0-100 ppm/1.0 ppm SO42-.

Convertisseur d'unités