An essential machine for preparing a wide variety of product samples including paint, varnish, cosmetics, glue, etc. with total consistency and reproducibility on various substrates including contrast charts, sheet steel, plastic foils and glass. All Elcometer 4340 models have 11 pre-set speeds and adjustable stroke length with quick release system.
The Elcometer 4340 Motorised Film Applicators are versatile, rugged and precise. The rigid construction ensures a smooth, consistent application without the ridges often associated with film application.
A range of applicator head attachments is available separately, allowing the user to select the most appropriate for their specific use and Standard (if applicable).
The Elcometer 4340 range of motorised Film Applicators comes as one universal base with user selectable head attachments - allowing the flexibility to test using standard film applicators (filmographs), spiral bar coaters, or using the combined attachment of both the film applicator and spiral bar attachment.
Available with a highly engineered table, available with or without a vacuum and heating element, each Elcometer Motorised Film Applicator is accurately measured using a Co-ordinate Measuring Machine to meet an incredibly high level of flatness. (Vacuum tables offer more reproducibility).
The average variation on Elcometer Application Tables is 2.3µm (0.092mil), while the average variation on glass used on some low cost tables is 12.0µm (0.48mil).
If a 100µm (4mils) coating is tested, readings taken using an Elcometer table would produce readings between 97.7 (3.9mils) and 102.3µm (4.1mils). On glass, the readings produced would be between 88 (3.5mils) and 112µm (4.48mils) - a 47% variation.
+15 to 100°C
(59 to 212°F)
Ambient to 200°C
(Ambient to 392°F)
|K4340M10-||110 to 240V||•||•|
|K4340M11-||110 to 240V||•||•||•|
|K4340M12-||220 to 240V||•||•||•|
|K4340M100||110 to 240V||•||•|
|K4340M101||110 to 240V||•||•|
|K4340M102||110 to 240V||•||•|
|K4340M110||110 to 240V||•||•||•|
|K4340M111||110 to 240V||•||•||•|
|K4340M112||110 to 240V||•||•||•|
|K4340M120||220 to 240V||•||•||•|
|K4340M121||220 to 240V||•||•||•|
|K4340M122||220 to 240V||•||•||•|
|Dimensions||780 x 490 x 320mm (30.7 x 19.3 x 12.6")|
|Certificate available||Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.|
|Packing List||Elcometer 4340 Film Applicator, power cable(s) and operating instructions|
|Can be used in accordance with: ASTM D 823-C
* Temperature Bath and Pump not supplied
|Models: M10-, M100, M101, M102||Models: M11-, M12-, M110, M111, M112, M120, M121, M122|
|KT004340N001||KT004340N101||Film Applicator Attachment|
|KT004340N002||KT004340N102||Spiral Bar Coater Attachment (with rubber mat)|
|KT004340N003||KT004340N103||Combined Film Applicator & Spiral Bar Coater Attachment (with rubber mat)|
|KTUK4930M001||Vacuum Pump, UK 240V (for use with Vacuum Tables)|
|KT004930M001||Vacuum Pump, EUR 220V (for use with Vacuum Tables)|
|KTUS4930M001||Vacuum Pump, US 110V (for use with Vacuum Tables)|