Shopping Cart

0 item(s) - 0.00$
Your shopping cart is empty!
 
Drop us a line
Contact
 
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Pasteurization Auditor Fluorophos® Biotechnology

Pasteurization Auditor Fluorophos®

Product Code:ALP


Need more Info? (514) 354-2511 - 1-800-463-4363

The Advanced Instruments Fluorophos ALP Test System employs a fluorometric assay for the measurement of Alkaline Phosphatase levels in milk, and other dairy products.

Alkaline Phosphatase, found naturally in raw milk, is destroyed at temperatures slightly above the temperatures necessary to destroy micro-organisms pathogenic to man. The Fluorophos ALP assay measures the ALP activity in dairy products, allowing users to monitor completeness of pasteurization and detect raw milk contamination.

  • Fastest test available – test results in just 3 minutes
  • Greatest sensitivity – detects as little as 0.003% raw milk contamination
  • Highest specificity – eliminating false positives
  • Globally proven – approved by AOAC, ISO/IDF and IMS for confirming proper pasteurization
  • HACCP Ready – ideal for use with a Hazard Analysis Critical Control Point program

By tracking ALP results, users can determine when maintenance of pasteurization equipment is necessary, thereby improving the integrity of your processing system.

  • Sample size is 75 µL
  • 3 minute test time
  • No stopping solution needed
  • On-board printer
  • Resolution of +/- 1 FLU (fluorescence unit)
  • Method: Fluorometric assay for the measurement of Alkaline Phosphatase levels

Uses and Applications: dairy products from cow, goat, sheep or other species

Specifications
Electrical
  • Voltage: 100 to 120 VAC or 200 to 240 VAC
  • Frequency: 50 or 60 Hz
  • Current: 100-120 VAC: 1.2 Amp. for fluorometer , 1/4-Amp. for heating block
  • 200-240 VAC: 0.7 Amp. for fluorometer , 1/8-Amp. for heating block
  • Fuses: as listed on power label
  • Power: Fluorometer 150 Watts; Heating block 30 Watts
  • Memory backup: Integral lithium cell; five years minimum in absence of power
Sample Volume See test kit instructions
Sample Capacity Single sample
Readout 20-character dot matrix
Units FLU (fluorescence units)
Auto Ranges
  • Low: 0 to 999.9 FLU/minute
  • High: 1000-9999 FLU/minute
Zeroing automatic
Resolution ±1 FLU
Gain automatic
Drift Less than 3 FLU per hour
Cuvette Size 12 × 75 mm round
Warm-up Time
  • Fluorometer 15 minutes
  • Heating Block 30 minutes
Optics 90° optical bench with light source, fixed filter, detector
Lamp quartz halogen
Filters
  • Excitation 440 ALP nm, narrow pass/405 ACP nm, narrow pass
  • Emission: 530 nm, sharp cut-off
Storage Temperature 32 to 158°F or 0 to 70°C
Communications RS-232C 9-pin DTE standard; baud selectable: 30, 1200, or 9600
Printer built-in, 40-column, thermal
Operating Temp. (ambient) 68 to 85°F or 20 to 29°C
Room Humidity 5-80% (non-condensing)
Test Time 3 minutes
Dimensions 42 cm x 18 cm x 32 cm (16.5" H x 7.0" W x 12.5" D)
Dimensions (Block) 21.5 cm x 9.0 cm x 16.5 cm (8.5" H 3.5" W 6.5" D)
Weight Net: 11 kg (25 lbs.)
Shipping: 16 kg (35 lbs.)

 

 

Convertisseur d'unités