Shopping Cart

0 item(s) - 0,00$
Your shopping cart is empty!
 
Drop us a line
Contact
Mini-titrator for acids in cheese and milk Biotechnology

Mini-titrator for acids in cheese and milk

Product Code:HI 84429


Need more Info? (514) 354-2511 - 1-800-463-4363

A Better Product for quality production

HI 84429 is a low cost, easy to use, microprocessor-based automatic titrator and pH meter that benefits from HANNA’s years of experience as a manufacturer of analytical instruments.
HI 84429 performs automatic analysis with all the necessary calculations through a clear and simple interface.
This advanced automatic titrator and pH meter has a powerful and effective built-in algorithm to analyze the shape of the pH electrode response and determines the reaction completion. By pressing the START key, the instrument automatically conducts an end point titration. The result is immediately displayed. The HI 84429 has a simple and reliable peristaltic pump to ensure accuracy and repeatability.
The HI 84429 comes with a preprogrammed analysis method designed for Total Titratable Acidity measurements on milk as well as a pH electrode, temperature probe, solutions and tubing. Please see ordering information on the back page for a list of included accessories.


The determination of total acids in dairy products is made according to a neutralization reaction; that is the reaction between the acids found in dairy products and a base. This type of reaction forms the basis of titration methods of analyzing acids.
Titratable acidity is measured on a degassed sample at the end point of 8.30 pH. The results are expressed in °SH, °Thm °D or % l.a.

 

HI 84429 is a low cost, easy to use automatic titrator and pH meter that provides professional results quickly and accurately.

 

 

About acidity measurement and its significance in the dairy industry

 

There are two fundamentally different conventions for expressing acidity in dairy products:
(a) Titratable acidity and
(b) hydrogen ion concentration, or pH.

The former expresses total acidity but does not measure the strengths of the acid, while pH indicates acid strength.
Acidity affects taste, thus this parameter is tested to determine the quality of the milk product. As milk acidity increases over time, measuring this parameter is also a means of monitoring storage conditions.
Acidity is determined by an end-point titration using sodium hydroxide (a base) and is defined as the consumption of base necessary to shift the pH value from 6.6 +0.1 (corresponding to fresh milk) to a determined basic pH value. While pH 7.0 is the actual point of neutralization, phenolphthalein is commonly employed as a color indicator to determine the end-point of reaction and with it, color change occurs at pH 8.3. Titratable acidity is expressed as one of a variety of units, the use of which reflects the titration method and strength of base employed during titration.
°SH — Soxlet Henkel degrees:
obtained by titrating 100 mL of milk with 0.25N NaOH, using phenolphthalein as the indicator. This method is common in Central Europe.
°Th — Thorner degrees:
obtained by titrating 100 mL of milk thinned with 2 parts distilled water, with 0.1 N NaOH, using phenolphthalein as an indicator; Used mostly in Sweden and the CIS.
°D — Dornic degrees: obtained by titrating 100 mL of milk thinned with two parts distilled water, with N/9 NaOH, using phenolphthalein as an indicator.
Used mostly in the Netherlands and France.
% l.a. — percent lactic acid:
obtained as °D divided by 100.
Frequently used in the UK, USA, Canada, Australia and New Zealand.

 

Note: Taking into account the concentration of sodium hydroxide, the results expressed in one value can be easily converted into any other unit value by consulting this convenient chart:
 
°SH
°Th
°D
% l.a.
NaOH
concentration (N)
0.25
0.1
0.111
0.111
1
2.5
2.25
0.0225
0.4
1
0.9
0.009
4/9
10/9
1
0.01

 

 

The HI 84429 mini Titrator makes measuring both pH and acidity of dairy products possible within one compact unit.
The titration method is a potentiometric end-point determination at a pre-determined pH value. HI 83329 mini Titrator eliminates the subjective endpoint color-change detection determined by the human eye, and instead employs the sensitivity and accuracy of a pH sensor, virtually eliminating error.
Acidity of dairy products can be expressed in any one of the units described earlier, simply by selecting the desired unit value. After performing a pump calibration with the supplied standard, you can then make titrations, expressed in the desired unit, using the same titrant. This eliminates the inconvenience of changing tubes, purging the titrant for tube cleaning and being sure that you have the right titrant concentration – thus eliminating wasted time and titrant.
The quantity of sample needed is much smaller in comparison with the classical method, where 100 mL of product is used.

 

HI84429 Titratable Acids mini Titrator and pH Meter Specifications
SPECIFICATIONS for HI 84429 Titrator
°SH
°Th
°D
% l.a
Titratable Acidity Range
0.0 to 15.0 °SH
0 to 40 °Th
0 to 30 °D
0.00 to 0.35 % l.a.
Titratable Acidity HR (High Range) Range
10 to 75 °SH
20 to 200 °Th
20 to 175 °D
0.0 to 2.0 % l.a.
Titratable Acidity Resolution
0.1 °SH
1 °Th
1 °D
0.1% l.a.
Titratable Acidity HR Resolution
0.5 °SH
1 °Th
1 °D
0.1% l.a.
Accuracy
5% of reading
Titration Methods
Acid-base titration
Principle
End point titration, 8.30 pH
Pump Debit
0.5 mL/min
Stirring Speed
1500 rpm

 

SPECIFICATIONS for HI 84429 pH and Temperature Meter
Range
pH
-2.0 to 16.0 pH; -2.00 to 16.00 pH
Temperature
-20.0 to 120.0 °C (-4 to 248°F)
Resolution
pH
0.1 pH; 0.01 pH
Temperature
0.1°C
Accuracy
pH
±0.01 pH
Temperature
±0 to 4°C without probe error
pH Electrode
 
FC 210 B (included)
Temperature Probe
 
HI 7662-T (included)

 

 

GENERAL SPECIFICATIONS for HI 84429
Environment
0 to 50°C (32 to 122°F); max 95% non-condensing
Power Supply
220V/50Hz; 10VA
Dimensions
208 x 214 x 163 mm (8.2 x 8.4 x 6.4”) with beaker
Weight
2200 g (77 oz.)

 

 

ORDERING INFORMATION
HI 84429 is supplied with a reagent set for 20 titrations, (2) 50 mL beakers, (2) 20 mL beakers, tube set with cap, pH electrode, temperature probe, stir bar, 1 mL syringe, (2) milk deposit cleaning solution sachets, (2) pH 7.01 buffer sachets, (2) pH 4.01 buffer sachets, power cable and instructions.
REQUIRED REAGENTS
HI 84429-50 Titrant
HI 84429-55 Standard, 2 mL
HI 84429-60 pH 8.30 buffer solution, 50 mL

 

 

 

Convertisseur d'unités