Flash determines the points of an assortment of products through a closed crucible method and two sample stirring speed options. Many used under shipping and safety regulations to detect contamination by volatile and flammable materials in oiled and lubrication oils and for the classification of samples of hazardous waste.
For determining the flash point of fuels, lubrication oils, liquids containing suspended solids and liquids which tend to form a film on the surface during the test.
|Standards||Meet the following standards: ASTM D93, AASHTO T73-811, IP 34, ISO 2719, DIN 51758, FTM 791-1102, NF M 07-019|
|Accessories||Test brass pot with handle, thermometer support|
|Dimensions||9.5 x 8 x 22.5 inches (24 x 20 x 57 cm) with optional stirring motor installed|
|Net Weight||24 lb (10.9 kg)|
|Shipping Weight||30 lb (13.6 kg)|
|Shipping Dimensions||3.1 ft3|
|Supply||115V, 50 / 60Hz|
|K16203||Electrically Heated Model, 115V 60Hz|
|K16273||Electrically Heated Model, 220-240V 50/60Hz|
|K16000||Modèle chauffé au gaz|
|Cat. No.||Accessories Description|
|K16220||Stirrer Motor, 115V 60Hz
Slow speed gear motor rotates stirrer of
Pensky-Martens Tester at 115rpm for
Procedure A and at 250rpm for Procedure B.
Includes adjustable support bracket and
mounting rod. Installs in base of flash tester.
|K16228||Stirrer Motor, 220-240V 60Hz|
|K16229||Stirrer Motor, 220-240V 50Hz|
|250-000-09F||ASTM 9F Thermometer
Range: 20 to 230°F
|250-000-09C||ASTM 9C Thermometer 1
Range: –5 to +110°C
|250-000-10F||ASTM 10F Thermometer
Range: 200 to 700°F
|250-000-10C||ASTM 10C Thermometer 1
Range: 90 to 370°C
Complete assembly. Includes shutter, flame
exposure device, stirrer and thermometer ferrule.
|K16020||Brass Test Cup
With heat resistant handle.
|K16020-NI||Nickel Plated Test Cup
With heat resistant handle