Shopping Cart

0 item(s) - 0.00$
Your shopping cart is empty!
 
Drop us a line
Contact
 
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Tester for bottles and jars Material Testing

Tester for bottles and jars

Product Code:Anditork


Need more Info? (514) 354-2511 - 1-800-463-4363

ANDITORK First – Bottle top/cap torque tester
The Anditork First is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 0.5" to 8" in diameteer. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
  • ANDITORK is designed for measuring the opening/closing torque of bottles tops and caps.
  • A large plate mounted with rubberised fingers can accept samples from 0.4” to 7.5”.
  • It is possible to measure the torque in both clockwise and anti clockwise sense.
  • The display is a CENTOR FIRST: display the peak torque or the current value.
  • For small sized samples, the MICROTORK is made of a little plate with rubberised fingers able to maintain bottles up to 2.75” diameter.

Technical features

  • Capacity: 100 lb Fin
  • Units: Nm – Kgcm - lbin
  • Resolution: 1 lbFin
  • Accuracy: 0,5% PE
  • Data acquisition rate: 1000Hz
  • RS232 output
Reference ANDITORK FT10
Capacity 100 lb Fin
Max diameter 7.5 in

 

ANDITORK – Bottle top/cap torque tester
The Anditork Easy is specially designed to measure opening torques for bottles and jars. It is equipped with a grip plate that holds products from 10mm to 200mm in diameteer. The rubber-coated gripping fingers are adjusted quickly using a travel knob. Torque readings can be made by tightening or loosening it, and the RS232 output can be used to save the data to a PC.
  • ANDITORK is designed for measuring the opening/closing torque of bottles tops and caps.
  • A large plate mounted with rubberised fingers can accept samples from 0.5 in to 8 in.
  • It is possible to measure the torque in both clockwise and anti clockwise sense.
  • The RS232 output allows data transfer to a PC.
  • The display is a CENTOR Easy to display the peak value and the current reading in the same time.
  • For small sized samples, the MICROTORK is made of a little plate with rubberised fingers able to maintain bottles up to 2 in diameter.

Technical features:

  • Capacity: 25, 50 and 100 lbFin
  • Units: Nm – Lb/in – Lb/ft
  • Resolution: 1/10000
  • Accuracy: 0,5% PE
  • Data acquisition rate: 1000Hz
  • Display of current and maximum torque values
  • Outputs: RS232, Analogic and Digimatic (Mitutoyo)
  • Option: if the cap has a security ring, the test can be carried out using the ANDITORK ST, which measures both the break (first peak) and the opening torque (max torque)
Model lbFin kgFmm Nm Diameter
ANDITORK 3 25 30 3 0.5 to 8 in
ANDITORK 6 50 60 6 0.5 to 8 in
ANDITORK 10 100 100 10 0.5 to 8 in

 

 

Convertisseur d'unités