Votre panier est vide !
 
Pour nous joindre
Contact
 
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Tarières monopièces Environnement

Tarières monopièces

Fabricant :AMS
Modèle :


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

One-Piece Regular Soil & Mud Augers

One-Piece Regular Soil AugersOne-Piece Mud Augers

AMS one-piece regular augers and mud augers are powder-coated for rust-resistance and have an attached 16'' rubber-gripped cross handle. They are inexpensive, lightweight alternatives for anyone who does not need to bore holes deeper than 4'. The 4'' models are perfect for quickly digging post holes because they eliminate the back and shoulder jarring caused by traditional post-hole diggers. They are made of powder-coated chromoly, carbon steel, and stainless steel. They are 53'' in length.

 

One-Piece Regular Soil Augers

Part # Diameter        Length   Weight
 400.48 2 3/4'' 53'' 4.1 lb.       
400.46 4'' 53'' 5.5 lb.

 

One-Piece Mud Augers

Part # Diameter        Length   Weight
 400.49 2 3/4'' 53'' 4.1 lb.
400.47 4'' 53'' 5.5 lb.

 

 

One-Piece Open-Face Auger

One-Piece Open-Face Auger

This thick, one-piece design, with its unique, hand-formed aggressive cutting head, pulls itself into the ground with little effort from the user. The one-piece open-face auger quickly penetrates through combination soils, from mud or clay to hard pan. The openface design is especially useful for obtaining quick visual profiles and provides for easy soil extraction. The attached 16'' rubber-gripped handle gives it a total length of 48'' and can be used to auger to 3' below the ground surface. The auger is made of gold zincplated chromoly.

Part # Diameter        Length   Weight
400.54 2 1/2'' 48'' 4.1 lb.

 

 

One-Piece Combination Edelman Auger

One-Piece Combination Edelman Auger

The one-piece combination edelman auger has a total length of 48'' and is capable of augering as deep as 3'. The attached 16'' rubber-gripped handle is welded to the steel shaft which is also welded to an Eijelkamp combination edelman auger head. It is versatile, lightweight and easy to use. It requires no assembly in the field and works well in a variety of soil conditions. The one-piece combination edelman auger is made of high-carbon steel and gold zinc-plated chromoly.

 Part # Diameter Length Weight
400.50 2 3/4'' 48'' 3.0 lb.
  (7cm) (122 cm) (1.4 kg)

 

AMS Connection Types

AMS signature series, threaded, and quick connect connections are used to connect AMS cross handles or slide hammers to AMS extensions,auger heads, and samplers. Each connection type has advantages that will make it more appropriate for particular uses or users. Please take into consideration that not all items will be available in every connection type. Contact us if you are unsure which connection type to use.

 

Helpful Tips for Using Signature Series and Threaded Connections

AMS recommends using non-adhesive fluoropolymer tape and wrench-tightening AMS threaded and signature series connections to help prevent the components from being damaged during heavy use and to minimize wear and tear over time. This also helps prevent threaded components from being difficult to disconnect after use with a slide hammer, hammer-head cross handle, or after hard twisting with a standard cross handle or ratcheting handle.

 

AMS Signature Series Connections

AMS Signature Series Connections

Signature series components feature a heavier thread than 5/8'' threaded connections. They are generally more robust and last longer under heavy use. Signature components can be connected and disconnected with only 2 1/2 turns, and have less risk of galling. Our most popular slide hammers, augers, core samplers, and soil sampling kits are available with signature series connections.

 

AMS 3/4'' & 5/8'' Threaded Connections

AMS 3/4'' & 5/8'' Threaded Connections

AMS 5/8'' and 3/4'' threaded connections use standard, national course, threads. 3/4'' are used with the new AMS professional line of augers and samplers. 5/8'' connections are the most
common and least expensive. Augers, core samplers, probes, slide hammers, hammer-head handles, and kits are available with threaded connections.


AMS Quick Connect Connection
AMS Quick Connect Connection

The AMS quick connect button-and-hex coupling system allows components to connect and disconnect faster and with less hassle than threaded or signature series systems. When in use,
the torque exerted on the system is placed on the hex – rather than threads – which makes the quick connect connection durable and prevents the components from binding together. Quick connect connections also allow for reverse augering with either a rubber-coated cross handle or ratcheting cross handle. Most augers and some soil sampling kits are available with AMS quick
connect connections, but the connections are not compatible with AMS slide hammers or the hammer-head cross handle.

 

Cross Handles for Augers
Poignées pour tarières

Poignées pour tarières AMS

 

Extensions for Augers
Rallonges pour tarières

Rallonges pour tarières

Convertisseur d'unités