Shopping Cart

0 item(s) - 0.00$
Your shopping cart is empty!
 
Drop us a line
Contact
 
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
ElectroSmog Meter

ElectroSmog Meter

Product Code:TES-92


Need more Info? (514) 354-2511 - 1-800-463-4363

Detects
  • Cellular Phone
  • Transmission Station
  • Microwave Oven
  • Spy Camera, wireless bug
  • Wireless Lan (Wi-Fi)

 

Features
  • 50MHz to 3.5GHz Frequency range
  • For isotropic measurements of electromagnetic fields
  • Non-directional (isotropic) measurement with three-channel measurement probe
  • High dynamic range due to three-channel digital results processing
  • Configurable alarm threshold and memory function
  • Easy to use

 

Applications
  • HIgh frequency (RF) electromagnetic wave field strenght measurement
  • Mobil phone base station antenna radiation power density measurement
  • Wireless communication applications (CW, TDMA, GSM, DECT)
  • RF power measurement for transmitters
  • Wireless LAN (Wi-Fi) detection, installation
  • Spy camera, wireless bug finder
  • Cellular /Cordless phone radiation safety level
  • Microwave oven leakage detection
  • Personal living environment EMF safety

 

Electrical Specifications
Sensor Type Electric field (E).
Frequency Range 50MHz to 3.5GHz
Directional characteristic Isotropic, 3-dimensional
Meaurement range (CW signal > 50MHz) 38mV/m to 11V/m.
3.8µW/m2 to 320mW/m2
Absolute error (@1V/m and 50MHz) ±1.0dB
Frequency response - taking into account typ. CAL factor ±1.0dB  (50MHz to 1.9GHz)
±2.4dB (1.9GHz to 3.5GHz)
Isotropy deviation Typ.±1.0db for f >50MHz
Overload limit 4.2W/m2 (40V/m)
Temperature response (0 to 50°C) ±1.5db
Note: Unless otherwise stated, all specifications hold under the following assumptions : Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23°C±3°C; relative air humidity 25% to 75%

 

General Specifications
Measurement method Digital, triaxial measurement
Directional characteristic Isotropic, triaxial
Measurement range selection One continuous range
Display resolution 0.1mV/m, 0.1µA/m, 0.001µW/m2
Setting time Typically 1s (0 to 90% of meas. value)
Display refresh rate Typically 400mS
Display type LCD 4 digit
Audible alarm Buzzer
Measurement units mV/m, V/m, µA/m, mA/m, µW/m2. mW/m2
Measurement display value Instantaneous measured value, maximum value or average value since power-on.
Measurement average time
(in per-set steps)
4s to 15 minutes
Measurement alarm function Adjustable threshold with ON/OFF
Measurement calibration
factor CAL
Adjustable
Manual data memory
and read storage
99 sets (only recall by meter)
Battery 9V
Battery life >15 hours
Accessory 9V battery, Carrying Case & Manaul

 

Convertisseur d'unités