Votre panier est vide !
Pour nous joindre
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Sonde de niveau d’eau

Sonde de niveau d’eau

Fabricant :Solinst
Modèle :Série Levelogger Edge 3001

Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363


Increased Stability and Reliability

The Levelogger Edge has improved stability and reliability with the introduction of the new Hastelloy® pressure sensor and Titanium based PVD coating. Both elements add increased corrosion resistance in harsh environments, as well as making readings more stable in extreme pressure and temperature conditions. The Levelogger Edge features a wider temperature compensated pressure range (0 to 50ºC, -10 to 50ºC for Barologger Edge), and improved thermal response time. The Hastelloy sensor can withstand 2 times over-pressure without permanent damage.

Improved Software

The new Levelogger PC Software is more streamlined, making it easier to program dataloggers, and view and compensate data. The software has more useful programming options, including compressed and repeat sampling, and a future stop option. Data compensation has been simplified, and allows multiple data files to be barometrically compensated at once. Communication speed between the Levelogger Edge and the PC has increased with the new Optical Reader, making downloading data faster.


  • Corrosion resistant Titanium based PVD coating
  • New robust Hastelloy pressure sensor
  • Improved temperature compensation and thermal response time
  • Faster communication and downloading speeds with new high speed Optical Reader
  • Memory for up to 120,000 readings
  • Streamlined software with more sampling options
  • Multiple data file barometric compensation



  • Aquifer characterization: pumping tests, slug tests, etc.
  • Watershed, drainage basin and recharge monitoring
  • Stream gauging, lake and reservoir management
  • Harbour and tidal fluctuation measurement
  • Wetlands and stormwater run-off monitoring
  • Water supply and tank level measurement
  • Mine water and landfill leachate management
  • Long-term water level monitoring in wells, surface water bodies and seawater environments


The Levelogger Edge is a self contained, automatic water level and temperature recording device. It combines a Hastelloy pressure sensor, temperature thermistor, 10-year lithium battery, and a datalogger with FRAM memory for 40,000 sets of data points, or up to 120,000 using the new compressed linear sampling option.

All components are sealed within a 7/8" x 6.25" (22 mm x 159 mm) stainless steel housing with corrosion resistant Titanium based PVD coating. The Levelogger Edge maintains the high resolution of previous Leveloggers, and an accuracy of 0.05% FS. The new, more precise Barologger Edge provides the easiest and most accurate method of barometric compensation. Battery life is 10 years based on a 1-minute sampling rate. The Levelogger Edge also inherits the Faraday cage design, which protects against power surges or electrical spikes caused by lightning. Its durable maintenance-free design, high accuracy and stability, make the Levelogger Edge the most reliable instrument for long-term, continuous water level recording.

Levelogger Setup

Programming Leveloggers is extremely intuitive. Simply connect to a PC using an Optical Reader or PC Interface Cable. All in one screen fill in your project information and sampling regime.

Templates of settings can be saved for easy re-use.

The Levelogger time may be synchronized to the computer clock, or Leveloader clock. There are options for immediate start or a future start and stop times. The percentage battery life remaining and the amount of free memory are indicated on the settings screen.

Convenient Sampling Options

Leveloggers can be programmed with linear, event-based, or a user-selectable sampling schedule. Linear sampling can be set from 1/8 second to 99 hours. Event-based sampling can be set to record when the level changes by a selected threshold. Readings are checked at the selected time interval, but only recorded in memory if the condition has been met. A default reading is taken every 24 hours if no “event” occurs. The Schedule option allows up to 30 schedule items, each with its own sampling rate and duration. For convenience, there is an option to automatically repeat the schedule.

The Levelogger Edge can be programmed with compressed linear sampling, which increases the Levelogger memory from 40,000 to up to 120,000 readings.

Helpful Utilities

The ‘Self-Test Diagnostic Utility’ can be used in case of an unexpected problem. It checks the functioning of the program, calibration, backup and logging memories, the pressure transducer, temperature sensor and battery voltage, as well as enabling a complete Memory Dump, if required. A firmware upgrade will be available from time to time, to allow upgrading of the Levelogger Edge, as new features are added.

Standard Cable Deployment

Leveloggers may be suspended on a stainless steel wireline or Kevlar® cord. This is a very inexpensive method of deployment, and if in a well, allows the Levelogger to be easily locked out of sight and inaccessible. Solinst offers stainless steel wireline assemblies and Kevlar cord assemblies in a variety of lengths.

NEW Solinst 3001 Well Cap Assembly

The new 2" Locking Well Caps are designed for both standard and Direct Read Cable deployment options. The well cap has a convenient eyelet for suspending Leveloggers using wireline or Kevlar cord. The Well Cap insert has two openings to accommodate Direct Read Cables for both a Levelogger and Barologger. Adaptors are available to fit 4" wells. The cap is vented to allow for the equalization of barometric pressure in the well. It slips over the casing, and the cap can be secured using a lock with a 3/8" (9.5 mm) shackle diameter.

Direct Read Cables

When it is desired to get realtime data and communicate with Leveloggers without removal from the water, they can be deployed using Direct Read Cables. This allows viewing of the data, downloading and/or programming in the field using a portable computer or Leveloader. Leveloggers can also be connected to an SDI-12 datalogger using the Solinst SDI-12 Interface Cable attached to a Direct Read Cable.

Barologger and Levelogger Installed in Well Using Direct Read Cables

Cable Specifications

Direct Read Cables are available for attachment to any Levelogger in lengths up to 1500 ft. (450 m). The 1/10" dia. (2.54 mm) coaxial cable has an outer polyethylene jacket for strength and durability.

The stranded stainless steel braided conductor gives nonstretch accuracy.



The Leveloader is a data transfer unit designed for use with all versions of the Solinst Levelogger, Barologger and Rainlogger. It is used to download and store multiple data files.

The 8 Mb FLASH memory stores up to 1,390,000 LT readings, 930,000 LTC readings, or 34 full Levelogger downloads. It can also be used to display data in real-time, and has optional password protection.

Simply use the connector cables for attachment to a Levelogger, or to a direct read cable, to allow downloading or reprogramming of the Levelogger settings in the field. It comes with cables for USB and RS-232 connection to a PC for data transfer (see Model 3001 Leveloader data sheet).

STS Telemetry

The STS Telemetry System provides an economical and efficient method to wirelessly send Levelogger data from the field to your desktop. Built for Leveloggers, the system combines high quality dataloggers, intuitive software and a variety of wireless communication options to create a remote monitoring solution.

CDMA and GSM digital cellular, satellite, landline and radio options give the flexibility to suit any project. Systems are suitable for both small to large networks. STS Systems are designed to save costs by enabling the self-management of data, as well as remote collection of the data. Alarm notification, remote firmware upgrades and diagnostic reporting make system maintenance simple (see Model 9100/9200 data sheet).





RRL Telemetry

The inexpensive RRL Remote Radio Link is ideal for short range applications up to 20 miles or 30 km; distances can be increased by using some radios as relay stations. Ideal for creating closed-loop monitoring networks using Leveloggers (see Model 9100/9200 data sheet).


Levelogger Edge Specifications

Level Sensor Piezoresistive Silicon with Hastelloy Sensor
Accuracy  ± 0.05% FS (Barologger Edge: ± 0.05 kPa)
Stability of Readings Superior, low noise
Units of Measure  m, cm, ft., psi, kPa, mBar, ºC. ºF
(Barologger Edge: psi, kPa, mBar, ºC, ºF)
Resolution 24 Bit Resolution
Normalization Automatic Temperature Compensation
Temp. Comp. Range  0º to 50ºC (Barologger Edge: -10 to +50ºC)
Temperature Sensor  Platinum Resistance Temperature Detector
Temp. Sensor Accuracy  ± 0.05ºC
Temp. Sensor Resolution  0.003°C
Battery Life  10 Years - based on 1 reading/minute
Clock Accuracy  ± 1 minute/year (-20ºC to 80ºC)
Operating Temperature  -20ºC to 80ºC
Maximum # Readings 40,000 readings FRAM memory, or up to 120,000 using linear data compression
Memory  Slate and Continuous
Communication  Optical Infrared Interface. Conversion to
RS-232, USB, SDI-12. Serial at 19,200 bps, 38,400 bps with USB
Size  7/8" x 6.25" (22 mm x 159 mm)
Weight 4.6 oz. (129 grams)
Corrosion Resistance Titanium based PVD coating
Other Wetted Materials  Delrin®, Viton®, 316L stainless steel,
Hastelloy, Titanium based PVD coating
Sampling Modes  Linear, Event & User-Selectable with Repeat Mode, Future Start, Future Stop, Real-Time View
Measurement Rates  1/8 sec to 99 hrs
Barometric Compensation  Software Wizard and one Barologger in local area (approx. 20 miles/30 km radius)



Models  Full Scale (FS)  Accuracy (typical)
Barologger  Air only  ± 0.05 kPa
F15, M5  16.4 ft., 5 m  ± 0.010 ft., 0.3 cm
F30, M10  32.8 ft., 10 m  ± 0.016 ft., 0.5 cm
F65, M20 65.6 ft., 20 m ± 0.032 ft., 1 cm
F100, M30  98.4 ft., 30 m  ± 0.064 ft., 1.5 cm
F300, M100  328.1 ft., 100 m ± 0.164 ft., 5 cm
F600, M200 656. 2 ft., 200 m ± 0.328 ft., 10 cm


Levelogger software v4.2.0 

Etiquettes : enregistreur, pression

Convertisseur d'unités