- Nous contacter
The Vaisala BAROCAP® Digital Barometer PTB210 is ideal for outdoor installations and harsh environments.
The barometers are designed to operate in a wide temperature range, and the electronics housing provides IP65 (NEMA 4) standardized protection against sprayed water.
The PTB210 barometers are ideal for use in applications such as weather stations, data buoys and ships, airports, and agrology. They are also an excellent solution for monitoring barometric pressure in industrial equipment such as laser interferometers and engine test benches.
The PTB210 barometers are designed for various pressure ranges. They are available in two basic configurations: serial output for 500...1100 hPa and 50...1100 hPa and analog output with diff erent scalings between 500...1100 hPa.
All the PTB210 barometers are digitally adjusted and calibrated by using electronic working standards. A higher accuracy barometer, that is fi ne-tuned and calibrated against a deadweight tester, is available for the 500...1100 hPa pressure range.
In addition, the PTB210 integrates directly with Vaisala Static Pressure Head Series SPH10/20. Th is pairing off ers accurate measurement in all wind conditions.
|The PTB210 barometers use the Vaisala BAROCAP® Sensor, a silicon capacitive absolute pressure sensor developed by Vaisala for barometric pressure applications.
The Vaisala BAROCAP® Sensor provides excellent hysteresis and repeatability characteristics and outstanding temperature and longterm stability. All PTB210 barometers are delivered with a factory calibration certificate which is NIST traceable.
|The PTB210 paired with the SPH10 Static Pressure Head.|
|Operating range (1hPa=1mbar)|
|Pressure range (order specified)
|500 ... 1100 hPa
50 ... 1100 hPa
|analog output||500...1100 hPa
|Operating temperature range||-40... +60 °C (-40…+140 °F)|
|Serial output (units in hPa)|
|Class A||Class B|
|Non linearity*||± 0.10||± 0.15||± 0.20|
|Hysteresis*||± 0.05||± 0.05||± 0.10|
|Repeatability*||± 0.05||± 0.05||± 0.10|
|Calibration uncertainty**||± 0.07||± 0.15||± 0.20|
|Accuracy at +20°C (+68 °F)***||± 0.15||± 0.20||± 0.35|
|Temperature dependence****||± 0.20||± 0.30||± 0.50|
|Total accuracy***||± 0.25||± 0.30||± 0.50|
|-40...+60 °C (-40…+140 °F)|
|Long term stability (hPa/year)||± 0.10||± 0.10||± 0.20|
|Non linearity*||± 0.20 hPa|
|Hysteresis*||± 0.05 hPa|
|Repeatability*||± 0.05 hPa|
|Calibration uncertainty**||± 0.15 hPa|
|Accuracy at +20 °C (+68 °F)***||± 0.30 hPa|
|Temperature dependence****||± 0.50 hPa|
|Total accuracy*** -40...+60 °C (-40…+140 °F)||± 0.60 hPa|
|Long term stability||± 0.10 hPa/year|
|* Defined as the ±2 standard deviation limits of end point nonlinearity, hysteresis error or repeatability error.
** Defined as ±2 standard deviation limits of inaccuracy of the working standard including traceability to NIST.
*** Defined as the root sum of the squares (RSS) of end point non-linearity, hysteresis error, repeatability error and calibration uncertainty at room temperature.
****Defined as ±2 standard deviation limits of temperature dependence over the operating temperature range.
|(• Factory setting)|
|normal mode||< 15 mA•|
|power down mode||< 0.8 mA|
|shutdown mode||0.2 mA|
|Settling time at power up||2 s|
|Serial I/O (factory setting•)||RS232C|
|RS232C /TTL (optional)|
|RS485, non isolated (optional)|
|parity||none, even•, odd|
|data bits||7•, 8|
|stop bits||1•, 2|
|Baud rate||1200, 2400, 4800, 9600, 19200|
|Response time||1 s•|
|Resolution||0.01 hPa (1 measurement/s)|
|0.05 hPa (20 measurements/s)|
|Outputs||0...5 VDC, 0...2.5 VDC (order specifi ed)|
|normal mode||< 8 mA|
|shutdown mode||0.2 mA|
|Response time||500 ms|
|Measurement rate||3 measurements/s|
|Supply voltage (reverse polarity protected)||5 ... 28 VDC|
|Max. pressure||5 000 hPa abs.|
|Pressure connector||M5 (10-32) internal thread|
|Pressure fitting||barbed fi tting for 1/8” I.D. tubing|
|electronics||IP65 (NEMA 4)|
|Housing material||PC plastic|
|Supply/output cable length||1, 2, 3, 5 or 10 m|
|Electromagnetic compatibility||Complies with EMC standard|
|EN61326-1, Generic Environment|
|in mm (inches)|