Votre panier est vide !
- Nous contacter
|Modèle :||iRIS 150|
|The iRIS 150 GPRS Dataloggers have been designed as a cost effective, low power, self contained dataloggers for use in a wide range of data gathering and logging applications. The dataloggers are supplied in a powder-coated die-cast aluminum enclosure. Power supply and I/O connections are provided by a small screw terminal block within the datalogger. Cable access is via two NG12 glands on the bottom edge of the enclosure. A small text/graphics LCD provides the user display and user input is via a four key keypad in the same style as other iRIS dataloggers.|
|The iRIS 150 requires the iCE3 GPRS cellular modem to provide remote telemetry data acquisition. The modem has been designed as a cost effective, low power, self-contained circuit extender to enable communication with equipment over a wireless (GPRS) network connection. The modem includes software which provides the GPRS network link management, data transfer and configuration view/edit functionality. The iCE3 comes standard with a DC power lead and a host device (RS232) cable. The SMA antenna connector allows the use of a small stubby antenna (optional accessory) or alternatively, a coaxial cable to a higher gain external antenna for use in areas where signal strength is lower.|
|Resolution||12 - Bit|
2-Analog (0 - 5 V), 2-Digital Inputs (30 Vdc Max In),
1-Digital Outputs (Open drain pull down, max 300 mA @ 30 V)
|SDI-12 Interface||SDI-12 hardware interface that fully complies with the SDI-12 electrical standard.|
1x RS232 DB9, DTE configuration. Fixed speed - 38400 bps. Or 1200 bps / 9600 bps when active in telemetered mode. 1x USB slave via mini USB connector.
NOTE: The USB connector is unavailable unless the front label is opened which will negate the IP65 rating. Contact us for details on the USB connection.
|Power Supply||Primary supply - external 6-15V dc power supplies can be connected. Internal 3.6V 2400mA/Hr lithium battery which is normally used as a backup. The internal backup battery is disconnected when the external supply present or USB is connected. Nominal external supply current is 0.5mA with LCD backlight off.|
|Operating Temperature||14 to 158°F (-10 to 70°C)|
|Storage Temperature||-4 to 185°F (-20 to 85°C)|
|Enclosure||Powder coated die-cast aluminum.|
|4.5 x 3.1 x 1.3 in (115 x 79 x 32 mm) (L x W x H) (Including RS232 connector and glands)|
|Weight||9.9oz (281 g) including lithium battery|
|FP0500||GPRS Datalogger Enclosure Kit W/ AC Charger Includes heavy-duty rugged, lockable enclosure, AC charger, smart charger, 12V 4.5Ah battery.|
|FP0550||GPRS Datalogger Enclosure Kit W/ Solar Panel Includes heavy-duty rugged, lockable enclosure, 5w 300mA Min. solar panel, smart charger, 12V 4.5Ah battery.|
|FP0020||iCE3 GPRS Modem|
|FP0635||GPRS Modem Antenna Kit NOTE: For GPRS modem wireless Internet telemetry only.|