Votre panier est vide !
 
Pour nous joindre
Contact
Floculateurs Environnement

Floculateurs VELP

Modèle :JLT4 & FC


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Flocculators
VELP Scientifica has developed a complete line of instruments to support the lab technician working in the environmental sector and for the separation of pollutants in waste-water treatment plants in particular.
Jar test
The choice and dosage of the chemical coagulant to be adopted for removing suspended solids from waste-water are established based on an evaluation of the results obtained from the Jar Test. Multiple stirrers with reproducible stirring speeds ensure repeatable and reliable results.
Leaching test
This is a test on solid wastes to be sent to the dump that uses diluted acetic acid or carbon dioxide-saturated water to detect the presence of toxic heavy metals.

 

JLT 4 and JLT 6
The JLT 4 and JLT 6 are multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results.

The highly versatile stainless steel stirring shafts offer height adjustment and are fitted with a self-locking device with clutch.

The sample can be backlit for easier reading.

The instrument has an ergonomic design and the control panel is sloped to facilitate parameter settings and readings. The rotation speed can be set from 10 to 300 rpm, with 1 rpm intervals, the time remaining can be set in hours or minutes.

UK, AU and USA adapter plugs are available on request.

 

Informations
Instrument Power supply Code No.
JLT 4 100-240 V / 50-60 Hz F105A0108
JLT 6 100-240 V / 50-60 Hz F105A0109

 

FC4S and FC6S
The FC4S and FC6S are highly resistant to chemical and mechanical aggression and corrosion.

The highly versatile stainless steel stirring shafts offer height adjustment and are fitted with a self-locking device with clutch.

The sample can be backlit for easier reading.

Motion is transmitted by four (in the case of the FC4S) or six (in the case of the FC6S) direct current gear motors in order to ensure optimum performance and reproducibility even at low speeds.

With 9 different speed settings for each position the instrument is totally flexible; the stirring speed can be set using the selectors on the front panel (10-15-30-45-60-90-120-150-200 rpm).

On demand version can reach 300 rpm.

UK, AU and USA adapter plugs are available on request.

 

Informations
Instrument Power supply Code No.
FC4S 100-240 V / 50-60 Hz F105A0111
FC6S 100-240 V / 50-60 Hz F105A0112

 

Specifications
Model JLT 4 JLT 6 FC4S FC6S
Number of positions 4 6 4 6
Independent positions    
Speed settings rpm from 10 to 300 from 10 to 300 10-15-30-45-60-
90-120-150-200
10-15-30-45-60-
90-120-150-200
Time setting 0-999 min 0-999 min
0-999 min 0-999 min
continuous continuous continuous continuous
Dimensions (WxHxD) mm (in) 645 x 347 x 260
(25.4 x 13.7 x 10.2)
935 x 347 x 260
(36.8 x 13.7 x 10.2)
645 x 347 x 260
(25.4 x 13.7 x 10.2)
935 x 347 x 260
(36.8 x 13.7 x 10.2)
Weight Kg (lb) 13 (28.6) 17 (37.4) 12.5 (27.5) 18 (39.6)
Power supply 100-240 V 100-240 V 100-240 V 100-240 V
Power 11 W 19 W 18 W 23 W


 

Etiquettes : Floculateurs, VELP

Convertisseur d'unités