Votre panier est vide !
- Nous contacter
PolyScience Heated Circulators come with the following accessories:
|Whether equipped with the entry-level MX Controller or the most sophisticated Performance Programmable, our Heated Circulating Baths are extremely easy to use. Crisp menu architecture, screen icons, and plain-text prompts make it easy to navigate through operational settings and options.|
|LidDock™ helps keep moisture where it belongs— in the bath. And accessing the reservoir drain is as simple as removing the Circulator’s front panel.|
|All models feature user-settable high-temperature safeties as well as redundant over-temperature protection and comply with RoHS, WEEE, IEC 61010-1, IEC 61010-2-010, IEC 61326-1, DIN 12876 and are CE and ETL certified. Our DuraTop™ surface is cooler to the touch when operating at high temperatures.|
|Exceptionally exacting temperature control, combined with a tap-water cooling-coil, allow you to maintain bath temperatures at or near ambient with stabilities as precise as ±0.005°C.|
|A variety of communication and control options, including Ethernet, USB data logging and computer control, bi-directional serial communication, and external circulation with remote temperature control, enhance functionality and applications flexibility.|
|Working Temperature||Up to 200°C|
|Maximum Pressure||psi (bar)|
|120 VAC/60 Hz Models||4.3 (0.3)|
|240 VAC/50 Hz Models||3.6 (0.25)|
|Maximum Flow Rate||Pressure gpm (l/min)||Section gpm (l/min)|
|120 VAC/60 Hz Models||5.3 (20.1)||3.9 (14.7)|
|240 VAC/50 Hz Models||4.4 (16.7)||3.2 (12.2)|
|Fully Integrated Heated Circulationg Baths|
|Capacity||7 Liter||15 Liter||20 Liter||28 Liter|
|Minimum Temperature**||Ambient +10°C||Ambient +10°C||Ambient +10°C||Ambient +10°C|
(L x W x D)
|6.18 x 5.59 x 5"
15.7 x 14.2 x 12.7 cm
|8.35 x 10.88 x 5.5"
21.2 x 27.6 x 14 cm
|9.85 x 12.45 x 5.5"
25 x 31.6 x 14 cm
|12.35 x 14.13 x 5.5"
31.4 x 35.9 x 14 cm
|* Maximum temperature is controller dependent for integrated systems (see Controller Selection Guide, pages 28 and 29); maximum temperature is dependent on tank material for Open Bath Systems with stainless steel or polycarbonate tanks. Immersion Circulator’s maximum temperature is dependent on fluid volume.
** Minimum temperature is shown with no external heat load. Electrical plugs for the part numbers listed are standard U.S. and European types. See page 128 for additional plug types and part numbers.
|Reservoir Size||7 Liter||15 Liter||20 Liter||28 Liter|
|Temperature Range||Ambient +10° to +200°C|
|Heater||1100 W (60 Hz)/2200 W (50 Hz)|
|Part Number 120 VAC/60 Hz||PP07H200-A11B||PP15H200-A11B||PP20H200-A11B||PP28H200-A11B|
|Part Number 240 VAC/50 Hz||PP07H200-A12E||SD15H170-A12E||PP20H200-A12E||PP28H200-A12E|