Votre panier est vide !
 
Pour nous joindre
Contact
Moteur de broyeur microfin et tête de coupe/broyage

Moteur de broyeur microfin et tête de coupe/broyage

Modèle :MF10 et MF 10.1


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

MF 10.1 Cutting-grinding head
Technical Data
Process type inline
Operating principle cutting / impact
Motor rating input [W] 1000
Motor rating output [W] 500
Speed range [rpm] 3000 - 6500
Power-on time ON [min] 120
Power-om time OFF [min] 30
Milling chamber, can be cooled with water no
Mill feed can be cooled in milling chamber with dry ice yes
Mill feed can be cooled in milling chamber with liquid nitrogen no
Dimensions (W x H x D) [mm] 320 x 380 x 300
Weight [kg] 9.7
Permissible ambient temperature [°C] 5 - 40
Permissible relative moisture [%] 80
Protection class according to DIN EN 60529 IP 22
RS 232 interface no
Analog output no
Voltage [V] 230 / 115
Frequency [Hz] 50/60
Power input [W] 1000
Ident. No. 2836000

 

MF 10 basic Microfine grinder drive
For crushing fibrous substances such as paper and vegetation, but also for plastics and material with a low volume weight. Before being discharged, the ground material passes through a sieve. This sieve is interchangeable and available in different hole sizes (not incl. with delivery). The ground material can then be collected using an NS 29 standard ground vessel.
Technical Data
Process type inline
Circumferential speed max. [m/s] 22.5
Feed grain size max. [mm] 15
Material milling chamber stainless steel 1.4308
Milling chamber, can be cooled with water no
Mill feed can be cooled in milling chamber with dry ice yes
Mill feed can be cooled in milling chamber with liquid nitrogen no
Dimensions (W x H x D) [mm] 320 x 560 x 300
Weight [kg] 2.2
Ident. No. 2870900

 

Convertisseur d'unités