Votre panier est vide !
 
Pour nous joindre
Contact
Débitmètre à flotteur pour fluides pétroliers

Débitmètre à flotteur pour fluides pétroliers

Modèle :


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Specifications
MATERIALS: 2024 - T351 Anodized aluminum body, piston and cone
C360 Brass body, piston and cone
T303 Stainless body, 2024 - T351 Anodized aluminum piston and cone
COMMON
PARTS:
Retaining Ring: SAE 1070/1090 Carbon Steel
Spider Plate: T316 SS
Spring: T302 SS
Indicator and
Internal Magnet:
PPS / Ceramic
Fasteners: T303 SS
Guard Seal / Bumper: Buna N
Pressure Seals: Viton®
Scale Support: 6063 - T6 Aluminum
Guard: Polycarbonate
End Caps: Nylon ST
THREADS: SAE J1926/1, NPTF ANSI B2.2, BSPP ISO1179,
Code 61 and Code 62: SAEJ518
PRESSURE
RATING:
Aluminum / Brass
Operating:
3,500 psi/241 bar max. (800 psi/55 bar max. for 3" series)
with a 3:1 safety factor.
Stainless Steel Operating: 6,000 psi/414 bar max. (5,000 psi/345 bar max. for ¾" to 1½" series)
with a 3:1 safety factor.
ACCURACY: ±2% of full scale, ±7% of full scale for ¼" meters
REPEATABILITY: ±1%

 

Reverse Flow By-Pass Option
Features a two-piece cone that responds to flow in the primary flow direction in the same manner as the standard design. Flow in the reverse direction causes the lower cone shuttle to shift, moving it below the sharp-edged piston orifice. This shift creates a gap which allows the fluid to flow freely in the reverse direction.
Normal Flow Direction Reverse Flow By-Pass

 

Specifications
A B C D E F
NOMINAL
PORT SIZE
LENGTH
in (mm)
WIDTH
in (mm)
DEPTH
in (mm)
OFFSET
in (mm)
FLATS
in (mm)
¼ (SAE 6) 4.8 (122) 1.68 (43) 1.90 (48) .84 (21) .88 (22)
½ (SAE 10) 6.6 (168) 2.07 (53) 2.40 (61) 1.04 (26) 1.25 (32)
¾ (SAE 12) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.50 (38)
1 (SAE 16) 7.2 (183) 2.48 (63) 2.85 (72) 1.24 (32) 1.75 (44)
1¼ (SAE 20) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70)
1½ (SAE 24) 12.2 (310) 4.12 (105) 4.72 (120) 2.06 (52) 2.75 (70)

 

Specifications

 

Convertisseur d'unités