Votre panier est vide !
- Nous contacter
The GL100 series announces support for additional sensors in volatile wireless and non-wireless environments with ability to exchange input module.
|Measuring the Temperature, Humidity, Acceleration, Carbon dioxide (CO2), Illuminance, UV, AC current, Voltage|
|GL100 are using the Wireless LAN (WLAN) of the IEEEE802 standards. Area that can use it is limited by the Wireless Telegraphy Act in the region.|
|Technical Specs & Details|
|GL100-WL, GL100-N main unit specifications|
|Number of channels||Varies by the input module used, and measurement type is fixed with each input module|
Type of input terminal
|Output signal||Alarm (1 channel), solid state switch with optical isolation
(Optocoupler, Max. load is the 30 V, 50 mA)
|Interface to PC||USB (micro USB B type connector), Wireless LAN (WLAN) in GL100-WL|
|Standards: IEEE802.11b, Communication distance: approx. 40 m
* It varies by the condition of the LAN. Real-time transfer rate is up to 500ms. The WLAN is able to disable. (It is enabled in the factory default setting)
|While using USB port:
|While using Wireless LAN (in GL100-WL):
|IP54 compatible (*)
* It is effective only in the condition that the input module is set to the GL100 and then the covers of connector and battery are closed. It is recommended to replace the packing of cover in periodically.
[W x D x H]
|Approx. 66 x 100 x 27 mm (exclude protrusion)|