Votre panier est vide !
 
Pour nous joindre
Contact
Enregistreur de donnée compact Petit Logger

Enregistreur de donnée compact Petit Logger

Modèle :GL100


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

The GL100 series announces support for additional sensors in volatile wireless and non-wireless environments with ability to exchange input module.
 

Main body
GL100-WL
(with WLAN)
GL100-N
(without WLAN)
Input modules
Measuring the Temperature, Humidity, Acceleration, Carbon dioxide (CO2), Illuminance, UV, AC current, Voltage
GL100 are using the Wireless LAN (WLAN) of the IEEEE802 standards. Area that can use it is limited by the Wireless Telegraphy Act in the region.

 

Technical Specs & Details
GL100-WL, GL100-N main unit specifications
Item Description
Number of channels Varies by the input module used, and measurement type is fixed with each input module
Input method,
Type of input terminal
Output signal Alarm (1 channel), solid state switch with optical isolation
(Optocoupler, Max. load is the 30 V, 50 mA)
Interface to PC USB (micro USB B type connector), Wireless LAN (WLAN) in GL100-WL
Wireless LAN
(in GL100-WL)
Standards: IEEE802.11b, Communication distance: approx. 40 m

* It varies by the condition of the LAN. Real-time transfer rate is up to 500ms. The WLAN is able to disable. (It is enabled in the factory default setting)
Storage device
  • Built-in memory: RAM (Approx. 4.9 MB)
  • External memory: microSD memory card
     
* Maximum file size for captured data is 1.9MB. It is recommended to use the microSD memory card that supports sleep mode. (Example: TS4GUSDHC4, made by Transcend)
Display
  • LCD (backlit monochrome, graphical type 128 x 64 dots)
  • Contents: Captured data and Setting menu (Stored data is not able to replay. It is able to replay using the PC application software.)
Functions
  • Real-time data capturing
  • Display the captured data value to the LCD in real-time and save the monitoring values
  • Set conditions using the Menu setting
While using USB port:

  • Output captured data in real-time
  • Output the saved data from the internal memory
  • Full control of the GL100 from the PC application software
While using Wireless LAN (in GL100-WL):

  • Output captured data in real-time
  • Output the saved data from the internal memory
  • Full control of the GL100 from the PC application software
  • Simple control of the GL100 from the application software of Smart Device
  • Send warnings via the e-mail
Alarm
  • Action
    Outputs the signal when the measuring data reaches the present conditions of alarm
     
  • Source
    Level of measuring data
     
  • Detecting method
    • Condition: Higher or lower (signal is higher or lower than the threshold)
    • Combination: OR
Trigger
  • Action
    Start or stop the recording of captured data by trigger
     
  • Source
    Start trigger: OFF, Level (*), Alarm, or Date
    Stop trigger: OFF, Level (*), Alarm
     
  • Level trigger is available in the analog input of the GS-4VT, GS-4TSR, and GS-3AT module.
     
  • Detecting method of the Level (*)
    • Condition: Rising or Falling (signal is passed through the threshold)
    • Combination: OR or AND
Dustproof and
waterproof
IP54 compatible (*)

* It is effective only in the condition that the input module is set to the GL100 and then the covers of connector and battery are closed. It is recommended to replace the packing of cover in periodically.
Power source
  • Alkaline battery (AA size x 2)
  • USB bus-power (5V, 200 mA) (*)
     
* When AC adapter for USB device is used, the required power capacity is 5V, 1A. Battery and AC adapter is not included.
Operating environment
  • Temperature: -10 °C to 50 °C
  • Humidity: up to 80 % RH (non condensed)
External
dimension
[W x D x H]
Approx. 66 x 100 x 27 mm (exclude protrusion)
Weight
  • GL100-N: Approx. 125 g
  • GL100-WL: Approx. 130 g


 

Convertisseur d'unités