- Nous contacter
Up to 4 units can be coupled together, making it possible to simultaneously measure and record up to 16 channels.
The MCR-4TC is designed to measure a wide range of temperatures using a thermocouple sensor (compatible types: K, J, T, S and R).
|Measurement Channels||Temperature 4 ch|
|Compatible Sensors||Thermocouple: Type K, J, T, S, R|
|Measurement Units||°C, °F|
|Measurement Range||Type K : -270 to 1370 °C
Type J : -210 to 1200 °C
Type T : -270 to 400 °C
Type S : -50 to 1760 °C
Type R : -50 to 1760 °C
|Input Impedance||Approx. 1 MΩ|
|Accuracy (*1)||Thermocouple Measurement
Type K, J, T: ±(0.5 °C + 0.3 % reading) [ at -100 °C or above ]
Type S, R : ±(1.5 °C + 0.3 % reading) [ at 100 °C or above ]
(Individual sensor inaccuracies not included.)
Cold Junction Compensation
±0.5 °C [ in operating environent of 10 to 40 °C ]
±0.8 °C [ in other operating environment ]
Auto : According to the range in use
|Measurement Resolution||0.1 °C|
|Recording Method||Instantaneous or Average|
|Recording Interval||100, 200, 500 ms.
1, 2, 5, 10, 15, 20, 30 sec.
1, 2, 5, 10, 15, 20, 30, 60 min.
|Logging Capacity (*2)||When recording 1 channel : up to 960,000 readings/ch
When recording 2 channels : up to 480,000 readings/ch
When recording 3 channels : up to 320,000 readings/ch
When recording 4 channels : up to 240,000 readings/ch
|Recording Mode||Endless ( Overwrite oldest data in the current recording session when capacity is full )
One Time ( Stop recording when capacity is full )
|Recording Start Method||Immediate Start or Programmed Start ( by individual logger or by group )|
|Group Recording||Up to 4 units ( 16 channels ) can be recorded simultaneously. ( Coupling of MCR-4TC and MCR-4V is possible. (*3) )|
|LCD Display Items||Measurements, Trend Graph, Battery Level, etc.|
|Communication Interfaces||USB Communication|
|Communication Time||Download Times for Full Data via USB
- From the master or a single unit: Approx. 1 minute 30 seconds
- From a slave unit: Approx. 4 minutes 30 seconds
|External Memory||SD Memory Card, SDHC Memory Card (*4) ( For Manual or Automatic Data Export )|
|Power||AA Alkaline Battery x 2 ( AA Ni-MH batteries may also be used ), USB Power ( 5 V 250 mA )|
|Battery Life (*5)|| For 4-Channel Measurement (AA Alkaline Battery)
(Battery life for 1-channel measurement is about 1.4 times longer than that of 4-channel measurement.)
|Input Terminal||Screwless Terminals
< Compatible Wires >
Single Wire : ø 0.32mm to ø 0.65mm ( AWG 28 - 22 )
Twisted Wire : 0.08mm2 to 0.32mm2 ( AWG 28 - 22 ), ø 0.12 mm or more in diameter
Stripping Length : 9 to 10 mm
|Isolation||CH1, CH2, CH3, CH4, and USB are isolated.
( Battery terminals are not isolated from the CH1-CH4 input terminals. )
CH1-CH4 Maximum Applied Voltage : ±50 V
Electrical Isolation Resistance : 50 MΩ or more ( DC ± 250 V ）
|Dimensions||H 120 mm x W 75 mm x D 32 mm|
|Weight||Approx. 190 g ( including batteries )|
|Operating Environment||Temperature: 0 to 50 °C
Humidity: 90 %RH or less ( no condensation )
|Accessories||AA Alkaline Battery x 2, USB Communication Cable (US-15C), Software (CD-ROM), Card Slot Cover, User's Manual Set (Warranty Included)|
|*1 : MCR-4TC has superior noise filter, but the measurement may sometimes fluctuate due to strong noise. Especially when the recording interval is set to 200 ms or less, the filtering becomes weaker and hence the fluctuation may become greater.
*2 : If the logging capacity is not filled at the end of one recording session, the logger can record up to 30 times.
*3 : Group Recording may not be started depending on the recording or measurement interval specifications of the connected Master unit.
*4 : Please check the [Functions] for information on memory cards whose operation has been confirmed.
*5 : Battery life varies depending upon multiple factors including ambient temperature, recording interval, number of measurement channels, and frequency of data export to a memory card. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life