Votre panier est vide !
Pour nous joindre
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Linge absorbant MicroSeal® – VP

Linge absorbant MicroSeal® – VP

Modèle :MicroSeal® – VP

Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

MicroSeal®–VP is an ultrasonically sealed edge cleanroom laundered wiper required for ISO Class 3 and above environments composed of 100% continuous filament polyester knit fabric.

This combination of properties provides MicroSeal®–VP with the highest level of cleanliness, abrasion resistance and chemical compatibility required for ISO Class 3 and above environments and applications requiring critical control of contaminants combined with superior performance.

Key Attributes
  • 100% continuous filament polyester knit
  • Ultrasonically sealed edge for reduced fiber contamination
  • Laundered and packaged in Berkshire’s ISO Class 4 cleanroom

  • Critically low particles, fibers, ions and extractables
  • High abrasion resistance
  • Chemically compatible with IPA, Acetone and other solvents
  • High absorbency
  • Low endotoxin levels
  • Light weight, high absorbency material design reduces actual cost in use compared to heavier weight products


  • Light weight, high absorbency design reduces landfill waste impact when compared to more traditional heavier
    weight designs
  • Complies with RoHS 2002/05 and REACH requirements


  • Designed for use in ISO Class 3 and higher cleanroom environments
  • Designed for the highest level of contamination control in critical processing applications
  • Oxidation, Metallization, CVD or Photolithography processes
  • Chamber cleaning and CMP processing
  • Stencil and other print roll cleaning applications
  • Steam autoclavable for aseptic applications
  • Cleaning of medical device products
  • Applying and removing cleaning and disinfecting solutions

  • Value Pack Option
    The value pack option provides the same great performance in a more economical bulk packaging format.
  • Pre-Wetted Option
    The same wiper material can be provided in pre-wetted formats for reduced VOC emissions, increased convenience,
    increased productivity, improved solvent control and cleaning protocol repeatability and reduced costs.
  • Sterile Validated Option
    For aseptic processing areas, the same wiper material can be provided in a gamma irradiated validated sterile to a 10–6
    sterility assurance level. Dry and pre-wetted versions available.

Technical data
Attribute   Units Value Test Method
Basis Weight   g/m2 130 TAPPI T-410
Caliper   μm 464 TAPPI T-411
Fibers ≥100μm fibers/cm2 0.038 IEST-RP.CC004.3,
Sec 6.1.3 / Sec 6.2.2
Particles ≥0.5μm x103/cm2 0.53 IEST-RP.CC004.3,
Sec 6.1.3 / Sec 6.2.1
Sorbency Capacity mL/m2 506 IEST-RP.CC004.3,
Sec 8.1 modified / Sec 8.2 modified
Efficiency mL/g 3.9
Rate seconds 1
Non-Volatile Residue DI Water g/m2 0.0037 IEST-RP.CC004.3,
Sec 7.1.2
IPA 0.0092
Ions Na+ ppm 0.20 IEST-RP.CC004.3, Sec 7.2.2
K+ ppm 0.016
Ca++ ppm 0.031
Mg++ ppm 0.0065
Cl- ppm 0.18
  • Technical data represented in this table are typical values at the time of publication. These should not be used as product specifications.
  • Due to differences in test methods applied and equipment utilized by different wiper manufacturers, valid product
    comparisons may only be obtained through side-by-side testing in the same test facility, under similar conditions.
  • Third party testing can be performed upon request.

Order information
Product Number Size Shts/pk Pks/cs Style
MicroSeal®-VP MSVP.0909.8 9x9” (23x23cm) 150 8 Stacked
MicroSeal®-VP MSVP.0909B.8 9x9” (23x23cm) 150 8 Value Pack
MicroSeal®-VP MSVP.1212.14 12x12” (30x30cm) 75 14 Stacked
MicroSeal®-VP MSVP.1212B.14 12x12” (30x30cm) 75 14 Value Pack


Etiquettes : Linge, absorbant, MicroSeal®

Convertisseur d'unités