Votre panier est vide !
 
Pour nous joindre
Contact
Mesureur portatif de tension des câbles

Mesureur portatif de tension des câbles

Modèle :Série CTM


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

The Check-Line Digital Cable Tension Meter quickly measures tension in cable guardrails, guy lines and overhead wires. It installs, measures and removes in seconds. The digital loadcell is highly accurate and requires no lookup or correction tables.
 

The Fastest Cable Tension Meter
The CTM can be placed on a cable, measure its tension, and removed in under five seconds! There are no complex lookup tables, no conversion charts. The operator can quickly select from 15 different wire sizes and types stored in Quick-Check’s memory. The Check-Tensioning mode graphically displays the current and target tensions for extremely quick setting of line tension. Even the infrequent battery changes are quick.

 

Broad Application
The CTM can be employed in many industries to ensure proper tensioning. Typical applications include tower and stack guy wires, pretensioned cable barriers, bridges, elevators, winch rope, prestressed concrete, fall arrest systems, aircraft cables and utilities.

 

Features
  • Measures Cables: 3/16"– 1"OD (5mm – 25mm)
  • Capacity: CTM-2000 — 2000 lb / 10 kN / 1000 kg
  • CTM-10000 — 10000 lb / 45 kN / 4500 kg
  • NIST Calibration Certificate included
  • 2 Year Warranty
  • Check-Tensioning mode saves time
  • Portable and rugged – designed for outdoor use
  • Built-in averaging saves time and eliminates errors
  • Stores calibrations for 15 unique wire sizes and types

 

Specifications
Capacity CTM-2000 - 2000 lb / 10 kN / 1000 kg
CTM-10000 - 10000 lb / 45 kN / 4500 kg
Wire sizes 3/16" up to 1" (4.75 up to 19mm)
Accuracy ±3% instrument capacity
Resolution Configurable low / med / high
Number of calibrations Up to 15 can be stored independently
Operating temperature -4 °F to 140 °F (-20 °C to 60 °C)
Loading error Cable elongation of only 0.08” (2mm)
Display Dot-graphic LCD display supports full text and 1 inch high digits
Sheave range Sheave accommodates rated wire size and 1/2” smaller. Sheaves are not compatible with larger wire sizes — order additional sheaves for larger wire sizes.
Units of Measure Pound-force, kilogram force, Newtons
Environment protection Suitable for continued outdoor use
Dimensions 10" x 23" x 3" (25 x 59 x 8 cm)
Weight Approx 11 lb (5 kg)
Warranty 2 Years
Specifying Sheave Sets
Four sheave sizes are available (see below). For most applications one sheave set is sufficient for the entire assortment of wire tensions. If you need to check tension in both 3/16" and 3/4" rope, then you should order two sheave sets. The operator must use the appropriate sheave set for the wire size and calibration stored. Changing sheave sets takes about two minutes using the included wrench.

  • CTM-SH-L Sheave for wires up to 1/4"
  • CTM-SH-P Sheave for wires up to 1/2"
  • CTM-SH-S Sheave for wires 1/4" to 3/4"
  • CTM-SH-T Sheave for wires 1/2" to 1"

 

Etiquettes : Mesureur, portatif, tension, des, câbles

Convertisseur d'unités