Votre panier est vide !
 
Pour nous joindre
Contact
Bain Saybolt à viscosité Essais sur matériaux

Bain Saybolt à viscosité

Modèle :SV3000 et SV4000


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

FEATURES
  • Microprocessor control of temperature between ambient and 240°C (464°F)
  • Four tube capacity
  • Dual digital displays show setpoint and actual temperature
  • Selectable temperature scale - Fahrenheit or Celsius
  • Automatic timing option for simplified, accurate measurement of efflux times
  • Conforms to ASTM D88, D244, E102, and related specifications

Constant temperature bath with available automatic timing feature for viscosity determinations using Saybolt viscometer tubes and orifices. Microprocessor PID circuitry assures precise temperature control within ASTM specified tolerances throughout the operating range of the bath. Simple push-button controls and dual digital displays permit easy setting and monitoring of bath temperature.

Two place calibration offset is provided. Accommodates four viscometers and four 60mL receiving flasks. Sliding draft shields and a chemical-resistant alignment plate facilitate handling of the flasks, and glare-free fluorescent backlighting is provided for easy viewing of the samples. Communications software (RS232, etc.) ramp-to-set, and other enhanced features are available at additional cost.

 

AUTOMATIC TIMING OPTION
At the push of a button, the automatic timer starts the sample flow, senses the 60mL end point, and digitally records and displays the efflux time in 0.1 seconds resolution with an accuracy of 0.05%. Automatic timing improves testing accuracy and convenience, eliminating the chain and cork assembly and the need to manually time each sample. Timer installation is available in any configuration from one to four tubes.

 

 

BATH CONSTRUCTION AND SAFETY FEATURES
Insulated bath interior is constructed entirely of heavy gauge stainless steel. A built-in overflow pipe and drain valve simplifies filling of the bath fluid to the proper level. Chemical resistant top plate provides excellent insulation and is easily removed to allow for cleaning of the bath interior. A cooling coil for tap water or refrigerated coolant is provided for operation at near-ambient temperatures. Steel cabinet has levelling feet and a chemical-resistant polyurethane-epoxy finish

 

 

INCLUDED ACCESSORIES
  • Thermometer Supports (4)
  • Oil Strainer
  • Tube Nut Wrench
  • Port Closures (2)
  • Cleaning Plunger
  • Chained Corks (4)
  • Withdrawal Tube
  • Orifice Wrench
  • Port Covers (4)

 

 

SPECIFICATIONS
Conforms to ASTM D88, D244, E102; AASHTO T72; FTM 791-304
Capacity 4 viscometer tubes
Temperature Range ambient to 464°F (240°C)
Temperature Stability ± 0.05°F (± 0.03°C)
Bath Capacity 5 gal (19L)
Recommended Bath Medium water or suitable heat transfer fluid
Electrical Requirements 115V, 50/60Hz, single phase, 12.3A; 220-240V, 50/60Hz, single phase, 6.4A
Dimensions (LxWxH) 29 x 25 x 33 in. (74 x 64 x 84 cm)
Net Weight 65 lbs (30kg)
Shipping Weight 82 lbs (37kg)
Shipping Dimensions 10 Cu. ft.

 

 

MODEL SV4000 INCLUDES...
  • Power supply board
  • Cable
  • Wiring harness for user or factory installation of up to four (4) K21404 Automatic Saybolt Viscosity Timing Sensors.

 

 

CAT. NO. DESCRIPTION
K21410 SV3000 Saybolt Viscosity Bath, 115V, 50/60Hz, Single Phase, 12.3A
K21420 SV3000 Saybolt Viscosity Bath 220-240V, 50/60Hz, Single Phase, 6.4A
K21414 SV4000 Automatic Saybolt Viscosity Bath 115V, 50/60Hz, Single Phase, 12.3A
K21424 SV4000 Automatic Saybolt Viscosity Bath 220-240V, 50/60Hz, Single Phase, 6.4A
Accessories
K21404 Automatic Saybolt Viscosity Timing Sensor Each port can accommodate one sensor for automatic timing operation on SV4000 Saybolt Viscosity Baths. User or factory installation is available.
355-001-002 Silicone Heat Transfer Fluid. Minimum flash point 620°F (326°C). Order quantity of 5

 

 

Convertisseur d'unités