Votre panier est vide !
 
Pour nous joindre
Contact
Fournaises tubulaires très résistant et à contrôle indépendant

Fournaises tubulaires très résistant et à contrôle indépendant

Modèle :1500°C


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Heavy duty 1500°C tube furnaces are available in single and three zone models, designed for high temperature metallurgical, ceramic, chemical and electronic research. Furnacs use independent digital temperature control modules (ordered separately) which are available in standard or programmable varieties with an optional communications port.
 

Features
  • Double-end silicon carbide heating elements mounted above and below the chamber
  • Heating elements cross the chamber at right angles with compressed spacing at ends to offset heat loss from end of process tube
  • Removable side panels for easy installation and electrical connection, simplified heating element replacement and adjustment
  • High temperature insulation with insulated end vestibules for better uniformity and energy efficiency
  • Long life, fast response type R thermocouples with 10' compensated lead wire and polarized plug

 

Three zone models
  • Three independent power circuits (zones) with independent thermocouples for control references
  • Full adjustment of each zone over entire operating range to 1500°C
  • Center zone uniformity achieved and operating length maximized through adjustable profiling of end zones by independent controller
  • Controlled temperature uniformity achieved with independent setpoint of end zones higher or lower than center zone

 

Specifications
Model Independent
Controller
Electrical,
Watts Ext.
(WxF-BxH)
*Process
Tube
(diameter)
Heated
Length
Ship
Weight
Single Zone - 1500°C Heavy Duty Solid Tube Furnace, temp. range 500 to 1500°C
STF54233C CC58125C 208/240V,
50/60Hz
7200 20x25x19 in.
50.8x60.5x48.3cm
2 in.
(5.08cm)
12 in.
(30.48cm)
250lb
(114kg)
STF54453C CC58125C 208/240V,
50/60Hz
6857 30x37x19 in.
76.2x94x48.3 cm
3 in.
(7.62cm)
24 in.
(60.96cm)
390lb
(177kg)
Model Independent
Controller
Electrical,
Watts Ext.
(WxF-BxH)
*Process
Tube
(diameter)
Heated
Length
Heated
Zone
Ship
Weight
Three Zone - 1500°C Heavy Duty Solid Tube Furnace, temp. range 500 to 1500°C
STF54459C CC58475C 208/240V,
50/60Hz
12600 22.5x37x20in.
57.2x94x50.8cm
3"
(7.62cm)
24 in
(60.96cm)
6/12/6"
(15/30/15cm)
390 lb
(177kg)
STF54759C CC58485C 208/240V,
50/60Hz
20000 33.5x37x31in.
85.1x94x78.7cm
6"
(15.24cm)
24in
(60.96cm)
6/12/6"
(15/30/15cm)
720lb
(327kg)
STF54779C CC58485C 208/240V,
50/60 Hz
25000 33.5x49x31in.
85.1x124.5x78.7 cm
6"
(15.24cm)
36in
(91.4cm)
6/24/6
(15/6
/15cm)
1000lb
(453kg)
* Process Tubes: These furnaces are designed for use with a variety of process tubes including alumina, mullite, quartz and metallic. Process tube is not supplied with furnace. For information on process tubes contact us. One set of (2) tube adapters included with furnace; largest specified size supplied.

Note: Power cord and hard wiring supplied by costumer.

 

Single zone controllers
1500°C Digital, Single Setpoint Controller
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint. Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.
1500°C Digital 16 Segment Programmable Controller
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), 1 program with 16 segments for ramps (up and down) and dwells (timed holds). Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.
Option B Overtemperature Control (OTC)
Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.
  • RS-485 communications port available as an option
MODEL CC58125C CC58125PC CC58125PBC
Digital X X X
With Programmer   X X
With Overtemp. Control     X
Electrical Volts, Hz 208/240V, 50/60Hz 208/240V, 50/60Hz 208/240V, 50/60Hz
Ext. (WxF-BxH) 14 x 19 x 10 in. (35.5 x 48.3 x 25.4 cm)
Ship Weight 40lb (19kg) 40lb (19kg) 45lb (21kg)

 

Three zone controllers
1500°C Three Zone Controller - Option One
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone. Includes three microprocessor-based PID controls (proportional, integral, derivative), single setpoint, 1 ramp to setpoint. Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.
  • RS-485 communications port available as an option.
MODEL CC58475C CC58485C
Digital    
With Programmer    
With Overtemp. Control    
Electrical Volts, Hz 208/240V, 50/60Hz 208/240V, 50/60Hz
Max Amps 20/30/20 60/120/60
Ext. (WxF-BxH) 17x21x17 in.
(43.2x53.3x43.2cm)
24x21x17 in.
(61x53.3x43.2cm)
Ship Weight 70lb (32kg) 80lb (37kg)
1500°C Three Zone 16 Segment One Programmable Controller - Option Two
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone.
Center Zone
One microprocessor-based PID programmable control (proportional, integral, derivative), 1 program of 16 segments for ramps (up and down) and dwells (timed holds). Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint.
End Zones
Two microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint which mimic the programmed profile of the center zone controller, but allow an offset up to 100°C. Offset is LED displayed.
Option B Overtemperature Control (OTC)
Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.
MODEL CC58434PC CC58434PBC
Digital X X
With Programmer X X
With Overtemp. Control    
Electrical Volts, Hz 208/240V, 50/60Hz 208/240V, 50/60Hz
Max Amps 20/30/20 20/30/20
Ext. (WxF-BxH) 14 x 19 x 17 in.
(35.5 x 48.3 x 43.2 cm)
14 x 19 x 17 in.
(35.5 x 48.3 x 43.2 cm)
Ship Weight 60lb (28kg) 65lb (30kg)
1200°C Three Zone 16 Segment Three Programmable Controllers - Option Three
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone. Includes three microprocessor-based PID programmable controllers (proportional, integral, derivative), with 1 program of 16 segments for ramps (up and down) and 8 dwells (timed holds) to control each zone separately. Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.
MODEL CC58475PC CC58485PC CC58475PBC CC58485PBC
Digital X X X X
With Programmer   X X X
With Overtemp. Control     X X
Electrical Volts, Hz 208/240V, 50/60Hz 208/240V, 50/60Hz 208/240V, 50/60Hz 208/240V, 50/60Hz
Max Amps 30/60/30 60/120/60 30/60/30 60/120/60
Ext. (WxF-BxH) 17x21x17 in.
(43.2x53.3x43.2cm)
24x21x17 in.
(61x53.3x43.2cm)
17x21x17 in.
(43.2x53.3x43.2cm)
24x21x17 in.
(61x53.3x43.2cm)
Ship Weight 70lb (32kg) 80lb (37kg) 80lb (37kg) 90lb (41kg)
1500°C Three Zone 16 Segment Three Programmable Controllers - Option Three
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jacks for each zone. Includes three microprocessor-based PID programmable controllers (proportional, integral, derivative), with 1 program of 16 segments for ramp (up and down) and dwells (timed holds). Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.
Option B Overtemperature Control (OTC)
Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple. RS-485 communications port available as an option.
  CC584343PC CC584343PBC
Digital X X
With Programmer X X
With Overtemp. Control X X
Electrical Volts, Hz 208/240V, 50/60Hz 208/240V, 50/60Hz
Max Amps 30/60/30 60/120/60
Ext. (WxF-BxH) 17x21x17 in.
(43.2x53.3x43.2cm)
24x21x17 in.
(61x53.3x43.2cm)
Ship Weight 80lb (37kg) 90lb (41kg)

 

Convertisseur d'unités