Votre panier est vide !
Pour nous joindre
T: 514-354-2511
T: 1 800 463-4363
F: 514-354-6948
Appareil d'essai de résidu de carbone Ramsbottom des produits pétroliers

Appareil d'essai de résidu de carbone Ramsbottom des produits pétroliers

Fabricant :Koehler
Modèle :K27100

Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Test Method
Determines the 'carbon residue' left after evaporation and pyrolysis of a sample oil in the Ramsbottom furnace, providing an indication of the deposit forming tendencies of fuels and guidelines for the processing of refinery products.


Ramsbottom Carbon Residue Apparatus
  • Conforms to ASTM D524 and related specifications
  • Microprocessor temperature control with digital display and overtemperature cut-off
Thermostatically controlled coking furnace for five samples. Cast-iron block type furnace reaches the standard test temperature of 550°C (1022°F) rapidly and controls with ±1°C stability.

Microprocessor temperature control has °C/°F switchable digital setpoint and display. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit should block temperature exceed the programmed cut-off point.

Communications software (RS232, etc.), ramp-to-set and other enhanced features are available as extra cost options. Contact your Koehler representative for information. Heavily insulated stainless steel cabinet with three-layer refractory top provides excellent heat retention.



Conforms to the specifications of: ASTM D524, D6074; IP 14; ISO 4262; FTM 791-5002; NF T 60-117
  • Furnace Type: Cast iron block
  • Capacity: 5 coking bulbs
  • Maximum Temperature: 650°C (1200°F)
  • Controller Sensitivity: ±1°C (± 2°F)
  • Heater: 0-2400W, ceramic band heater
  • Electrical Requirements:
    • 115V 50/60Hz, Single Phase, 20.8A
    • 220-240V 50/60Hz, Single Phase, 10.9A



  • 16 x 211⁄2 x 141⁄2 (41 x 55 x 37)
  • Net Weight: 64 lbs (29kg)



Shipping Information
  • Shipping Weight: 78 lbs (35kg)
  • Dimensions: 8.2 Cu. ft.



Ordering Information
K27100 Ramsbottom Carbon Residue Apparatus,
115V 50/60Hz
K27190 Ramsbottom Carbon Residue Apparatus,
220-240V 50/60Hz
332-007-001 Coking Bulb
Pyrex™, with capillary
Conforms to ASTM D524 specifications
362-010-001 Sample Charging Syringe
382-018-001 Needle, 18 gauge, 2"
K27320 Coking Bulb Filling Device 1
Convenient time saving device fills up to
five coking bulbs at a time. Ideal for viscous
fluids that are difficult to handle at room temperature.
K27200 Control Bulb 1
Stainless steel, with IC thermocouple.
May be used with a thermocouple pyrometer*
to verify compliance of the furnace
with ASTM performance requirements.
K29310 Digital Thermometer, 115V
K29319 Digital Thermometer, 220-240V





Convertisseur d'unités