- Nous contacter
|Modèle :||Des diésels, des huiles, du kérosène et des bio essences|
A new laser based particle counter for checking and maintaining the quality of fuel throughout the distribution network. Fuel types include aviation turbine oils, biofuels and biofuel blends, heating oil, gas oil, diesel - automotive and marine, gasoline and kerosine. An Advanced Particle Counter for monitoring Aviation Fuels, Fuel Oils, Diesels, Kerosines, Gasolines and Bio Fuels.
For Aviation Fuel:
IP PM-DQ (proposed) - Determination of the level of cleanliness of aviation turbine fuel - Portable automatic particle counter method
For all Fuels:
ASTM (Draft) - Standard test method for the evaluation of the level of cleanliness of distillate and liquid bio-fuels (Portable automatic particle counter method)
|Maintaining Fuel Quality in the supply and distribution systems is a major concern. The potential for particulate (dirt) contamination is high, particularly from|
The uses the light obscuration principle, where the fluid under test is passed through a cell comprising a laser and a calibrated sensor. Particles in the fluid cast a shadow onto the sensor, which determines the area / diameter and number of particles in the sample.
Sampling and measurement is simple; fuel is drawn from a sample container or directly from the supply line. has a 10 bar standard pressure rating or can sample up to 315 bar line pressure using the optional pressure reducing system. An integral pump automatically draws the sample through an internal measuring chamber, removing the need for an external sampling pump.
There is fully automatic once the test sequence is started. The instrument flushes the cell with sample prior to commencing the measurements. A precise volume of sample is then analysed. The flushing / sample analysing sequences are automatically repeated in accordance with the selected test method.
Results are displayed on the LCD screen in real time and printed out on the integral printer as the test progresses. The results are shown for 6 particle size bands in Particles/ml and ISO Code. Results can be saved to memory for trend analysis of samples, printed out on the integral printer or downloaded to a PC or external printer.
The "Log and Show" software option allows data to be downloaded from the instrument to a PC in different formats and allows the instrument to be fuly controlled and configured from any Windows interface.
EASY SAMPLING CONECTIONS
|Particle Size Range||4µm to >70µm|
|Measuring Channels||6 channels with simultaneous measuring capability|
|Size Bands - IP PM-DQ||
|Size Bands - ASTM (Draft)||
|Measured Sample Volume||10ml|
|Total Sample Volume Required||120ml minimum (includes rinse cycles)|
|Input (sample) Pressure||Operation up to 10 bar (optional 315 bar)|
|Display and Control||LCD display, 4-key-operation|
|Measuring Mode||Single or continuous measurement with a cycle period of 1 - 99 min|
|Alarm level||User defined|
|Printer||Integral thermal printer|
|Voltage||100/230VAC, 50/60Hz, max 30W|
|Size (HxWxD)||37 x 33 x 21cm|