Votre panier est vide !
 
Pour nous joindre
Contact
Appareil de détermination de la stabilité à l'oxydation de l'essence et des carburants d'aviation

Appareil de détermination de la stabilité à l'oxydation de l'essence et des carburants d'aviation

Modèle :


Besoin de plus d'informations? (514) 354-2511 - 1-800-463-4363

Solid Block Oxidation Baths
  • Solid block baths conforming to ASTM and related specifications.

Constant temperature baths for heating K10500 Oxidation Pressure Vessels in accordance with ASTM specifications .
Solid Block Baths–Insulated aluminum block baths available in two or four-unit capacity. Baths feature microprocessor temperature control with built-in overtemperature protection and dual LED displays for setpoint and actual temperature values in °C/°F format. The solid block design offers operating advantages over the boiling water bath, and meets temperature control and other requirements of ASTM and related methods. It should be noted, however, that many applicable specifications for this test method call for a liquid bath medium. Housed in an insulated steel cabinet with chemical-resistant polyurethane enamel finish. Includes lids for pressure vessel ports. Order thermometer separately.
Communications software (RS232, etc.) ramp-to-set and other enhanced features are available on the solid block and 4-6 place liquid baths as extra cost options. Contact your Koehler representative for information.


Specifications
  • Conforms to the specifications of: ASTM D525, D873; IP 40, IP 138; ISO 7536;
  • DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013
  • Maximum Temperature: Solid Block Baths: 250°F (121°C)
  • Solid block baths meet temperature control and other requirements of ASTM and related methods. While the aluminum block design offers operating advantages over the standard boiling water bath, it should be noted that many applicable specifications for this test call for a liquid bath medium. Please refer to the test method for the specific requirements.

Dimensions
  • L x W x H, in.(cm)
  • 151⁄2 x 10 x 41⁄2 (391⁄2 x 251⁄2 x 111⁄2)
  • Net Weight: 23 lbs (101⁄2kg)

Ordering Information
Catalog No. Accessories
K10540

Glass Sample Container and Cover with pour out spout

K10510
Gasket. Replacement composition gasket for K10500 Oxidation Pressure Vessel
K10551
Pressure Line. For pressurizing Oxidation Pressure Vessel. 6 ft. (1.83m) long, with quick release coupling for needle valve on pressure vessel and threaded fitting for oxygen tank
K10556
Oxygen Manifold Pressure Relief System Connects to oxygen source to prevent overcharging of vessel. Equipped with relief valve to vent at 125psi and 300 series stainless steel 150psi burst disk assembly. Constructed from 300 series stainless steel. Cleaned for oxygen service
K10520
Wrench. For tightening seal on Oxidation Pressure Vessel
K10530
Table Socket. Installs in benchtop to aid in tightening seal on Oxidation Pressure Vessel
K10560
Bronze Tubing For connecting pressure recorder to vessel. Flexible seamless helical tubing with protective armor braid and connections. 5 ft (1.52m) long
K10525
Burst Disk Assembly Retrofit kit for Oxidation Pressure Vessel without burst disk assembly
250-000-22F
ASTM 22F Thermometer Range: 204 to 218°F
250-000-22C
ASTM 22C Thermometer Range: 95 to 103°C

Ordering Information
Type Catalog No.  

 

Electrical Requirements Heater
Range
Dimensions
L x W x H, in.(cm)
Solid Block
K10401
2 vessels

115V 50/60Hz
12A

0-1300W

15x10x17

(38x25x43)

K10491

220-240V 50/60Hz
6A

K10403
4 vessels

115V 50/60Hz
22A

0-2500W

24x10x17

(61x25x43)

K10493

220-224V 50/60Hz
11A

 

 

Convertisseur d'unités